Hi Robert, Thanks for the answers.
Am I right assuming image bone-debian-9.0-iot-armhf-2017-06-25-4gb.img.xz <http://rcn-ee.net/rootfs/bb.org/testing/2017-06-25/stretch-iot/bone-debian-9.0-iot-armhf-2017-06-25-4gb.img.xz> would be the best for the BeagleBone Blue? Thanks, Ronald 2017-06-26 16:12 GMT-04:00 Robert Nelson <[email protected]>: > On Mon, Jun 26, 2017 at 2:07 AM, <[email protected]> wrote: > > Hi All, > > > > I just received my BeagleBone Blue board, which I plan to use > controlling a > > variety of drones and rovers using ArduPilot. > > > > I easily managed to get my computer to connect via WiFi to the board, and > > then the board to Internet. > > > > Next, I launched the Debian update/upgrade process and that's were the > > events kind of ran off the script. > > > > Towards the very end of the process, after Winston finishes installing > with > > its components, I get the message "c9-core-installer: Stopping: > > cloud9.service". A yellow window then appears at the top of the Cloud9 > page > > with a countdown to a reconnection attempt and the command window fades. > > Right now, th Cloud9 IDE client is attempting to reconnect every 60 > seconds, > > with no success. > > > > The first time around, I wait a while and with absolutely nothing > happening, > > I decided to reboot the card. Everything comes back to an apparently > normal > > operating state, except that the Cloud9 IDE remains impossible to access > (I > > presume the service never got restarted). > > > > I then proceed to build a SD boot disk and I restart the whole Debian > > Update/Upgrade process, with the exact same result. This time, I decided > to > > let the processor run, hoping that the Update/Upgrade process will > restart > > the Cloud9 IDE service automatically before completing the process. > > > > The BeagleBone startup web page is showing the processor running and > Debian > > having been upgraded to BoneScript 0.6.1. > > > > What must I do to get the Cloud9 service restarted? > > A simple "ctrl-r" should do the trick, but depending on the previous > version of cloud9, you might just have to reboot the board. > > ps, you can grab newer images, which have the latest cloud9 and > ardupilot pre installed: > > http://rcn-ee.net/rootfs/bb.org/testing/2017-06-25/stretch-iot/ > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CABnVuz-G82cwYjha9nbxsGjh5zx9ywOYEAzMqBgrySj2om7Npw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
