Correct. On Jun 26, 2017 11:27 PM, "Ronald Houde" <[email protected]> wrote:
> Hi Robert, > > Thanks for the answers. > > Am I right assuming image > bone-debian-9.0-iot-armhf-2017-06-25-4gb.img.xz > <http://rcn-ee.net/rootfs/bb.org/testing/2017-06-25/stretch-iot/bone-debian-9.0-iot-armhf-2017-06-25-4gb.img.xz> > would be the best for the BeagleBone Blue? > > Thanks, > Ronald > > > 2017-06-26 16:12 GMT-04:00 Robert Nelson <[email protected]>: > >> On Mon, Jun 26, 2017 at 2:07 AM, <[email protected]> wrote: >> > Hi All, >> > >> > I just received my BeagleBone Blue board, which I plan to use >> controlling a >> > variety of drones and rovers using ArduPilot. >> > >> > I easily managed to get my computer to connect via WiFi to the board, >> and >> > then the board to Internet. >> > >> > Next, I launched the Debian update/upgrade process and that's were the >> > events kind of ran off the script. >> > >> > Towards the very end of the process, after Winston finishes installing >> with >> > its components, I get the message "c9-core-installer: Stopping: >> > cloud9.service". A yellow window then appears at the top of the Cloud9 >> page >> > with a countdown to a reconnection attempt and the command window fades. >> > Right now, th Cloud9 IDE client is attempting to reconnect every 60 >> seconds, >> > with no success. >> > >> > The first time around, I wait a while and with absolutely nothing >> happening, >> > I decided to reboot the card. Everything comes back to an apparently >> normal >> > operating state, except that the Cloud9 IDE remains impossible to >> access (I >> > presume the service never got restarted). >> > >> > I then proceed to build a SD boot disk and I restart the whole Debian >> > Update/Upgrade process, with the exact same result. This time, I >> decided to >> > let the processor run, hoping that the Update/Upgrade process will >> restart >> > the Cloud9 IDE service automatically before completing the process. >> > >> > The BeagleBone startup web page is showing the processor running and >> Debian >> > having been upgraded to BoneScript 0.6.1. >> > >> > What must I do to get the Cloud9 service restarted? >> >> A simple "ctrl-r" should do the trick, but depending on the previous >> version of cloud9, you might just have to reboot the board. >> >> ps, you can grab newer images, which have the latest cloud9 and >> ardupilot pre installed: >> >> http://rcn-ee.net/rootfs/bb.org/testing/2017-06-25/stretch-iot/ >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgVpDX4EN67ApcesK9XHQhzoLhWkvgOMDwQgj%2BAzdVMgw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
