Yes, of course, with hot-air and with very much attention. I don't know exactly if I need to make any changes to the board schematics, to boot without problems from sd card.
On Tuesday, August 8, 2017 at 4:23:56 PM UTC+3, Przemek Klosowski wrote: > > are you aware that the eMMC chip is a ball-grid package? It's possible to > unsolder it, of course, with skill and hot-air repair station. I am not > sure if the boot sequence stops on failing to detect the eMMC presence ; I > suspect it's possible to force the SD boot using the usual keypresses that > work with eMMC present. > > On Mon, Aug 7, 2017 at 4:03 PM, <[email protected] <javascript:>> wrote: > >> Hello, >> >> Is there any way to physically extract the emmc memory chip and boot >> successfully the Angstrom linux distribution just/only from microSD card ? >> >> Do you have any advice for this problem ? >> >> Thank you in advance. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/113c5509-d42a-477f-9d63-788a84bad3bf%40googlegroups.com >> >> <https://groups.google.com/d/msgid/beagleboard/113c5509-d42a-477f-9d63-788a84bad3bf%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/44db161f-5c95-4b5e-922b-1df67fe0a350%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
