Hi, are you still having issues this? If so, please raise an issue in the github repo and I'll try to reproduce and resolve the issue: https://github.com/adafruit/adafruit-beaglebone-io-python/issues
thanks, drew On Fri, Aug 18, 2017 at 1:33 PM, JHS_newbie <[email protected]> wrote: > Next Update... > > Adafruit_BBIO python GPIO output seems to work, I can toggle voltage low or > high, measure it on the multimeter, and see it in the show-pins utility. > > Although the pins for input are getting set up properly through python > Adafruit_BBIO according to the show-pins utility, I can't get any GPIO input > to actually detect either by polling or adding event. > > Any thoughts? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/904c030e-a2dd-409c-9e53-b1cc4d4d10d0%40googlegroups.com. > > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAEf4M_DigTz4M5c2FtYqEk6qtQkcKSwB6o%3DnMYV%3Dh%2BBMSytZdQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
