Hi all I am currently trying to get the EBB-PRU-ADC example from Derek Molloys website working on my new version of Debian.
I am using kernel version; uname -r 4.4.54-ti-r93 In this later kernel, uio_pruss is no longer used and remote proc has now taken over. I have already gone through the pain of getting the EBB_PRU_ADC overlay to load by disabling the universaln cape and then recompiling Dereks overlay with the newer dtc compiler. The overlay has loaded successfully; cat /sys/devices/platform/bone_capemgr/slots 0: PF---- -1 1: PF---- -1 2: PF---- -1 3: PF---- -1 4: P-O-L- 0 Override Board Name,00A0,Override Manuf,EBB-PRU-ADC However, I need to increase the sram pool size and extram pool size as follows; sram_pool_sz – SRAM pool size to allocate (default 16K). extram_pool_sz – The external RAM pool size to allocate (default 256K). My kernel now uses remote proc instead of uio_pruss and I am struggling to work out how to achieve this. How do I go about this with the modules that are loaded such as; lsmod |grep pru pru_rproc 15431 0 pruss_intc 8603 1 pru_rproc pruss 12026 1 pru_rproc Should I be trying to use uio_pruss or can I do it through the rproc module? Any help would be highly appreciated! Thanks B -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0788cc63-5a48-4570-9260-5d4c61117ebd%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
