Hello Community, I use beaglebone blue, I was working on blue as recently i have received EduMIP kit. It was all working fine till yesterday, when charge goes off I kept my LIPO battery for charging (I use VOLCraft charger).
After charging I connected to my blue again, the LEDs started blinking, I removed and plugged again again multiple times, after sometimes the blink also disappeared. Now nothing happening when I connect LIPO to my blue. Right now I have connected 12Volds adapter its booting fine, and also I have connected LIPO battery, LEDs 50,75.100 are green, and 25 is red.. I have installed rc cape applications, the output of rc_battery_monitor is here: 2S Pack Jack #Cells Cell 8.64V 12.68V 2 4.32V Any feedback ? Thanks Regards, Jeshwanth -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/dba16e1d-1a2c-496d-848f-5bb25ccbd5b1%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
