Windows is too stupid to recognize the other filesystem. Boot it in the beaglebone and you should be fine.
Andrew On Sat, Sep 9, 2017 at 4:34 AM, <[email protected]> wrote: > Hello, > > I have been trying to write the image of > *bone-debian-9.1-lxqt-armhf-2017-08-31-4gb > * to SD card and it is successful as well but when I check the file > system onto the card, it only shows FAT32 type and when I click the SD > card, it is corrupted and says it again needs format. > > Now I have previously worked on raspberry pi 3 as well and I am very much > pretty sure about the process of un-archiving the XZ file to img file and > then writing the images to SD card, but don' t what is the problem with the > Debian images. > > I have tried loading the above images on 4 GB as well as 8 GB SD > cards(Class 4 both) and in both the cards it gets corrupted. > > On same 8 GB card I tried to write the Raspbian jessie image and it shows > a well worked output of proper file system. > > Also even after this much failure, with very little hope left I tried the > flashing procedure onto the Beaglebone Black with the disk image of > *bone-debian-9.1-lxqt-armhf-2017-08-31-4gb > * written on the SD card. > > I tried the same suggested procedure of holding the S2 button down and > powering up the board but it seems to boot the normal preloaded OS only and > just doesn' t flash as per the LED sequence showing up. > > I have used both WIN32Disk imager and Etcher for wrinting the images to SD > card. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/21c7568b-cac6-4478-9413-4a2930285a78%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/21c7568b-cac6-4478-9413-4a2930285a78%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALA5tJJraGzYko3ETHJm_WT%2BvASqkYPA6E3Rv6PtH9NDaGiVbA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
