Hello, I have been trying to write the image of *bone-debian-9.1-lxqt-armhf-2017-08-31-4gb * to SD card and it is successful as well but when I check the file system onto the card, it only shows FAT32 type and when I click the SD card, it is corrupted and says it again needs format.
Now I have previously worked on raspberry pi 3 as well and I am very much pretty sure about the process of un-archiving the XZ file to img file and then writing the images to SD card, but don' t what is the problem with the Debian images. I have tried loading the above images on 4 GB as well as 8 GB SD cards(Class 4 both) and in both the cards it gets corrupted. On same 8 GB card I tried to write the Raspbian jessie image and it shows a well worked output of proper file system. Also even after this much failure, with very little hope left I tried the flashing procedure onto the Beaglebone Black with the disk image of *bone-debian-9.1-lxqt-armhf-2017-08-31-4gb * written on the SD card. I tried the same suggested procedure of holding the S2 button down and powering up the board but it seems to boot the normal preloaded OS only and just doesn' t flash as per the LED sequence showing up. I have used both WIN32Disk imager and Etcher for wrinting the images to SD card. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/21c7568b-cac6-4478-9413-4a2930285a78%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
