On Thu, Sep 21, 2017 at 11:41 AM, William Hermans <[email protected]> wrote: > The board is bootble / usable right now ? The FAQ could be taken both ways. > e.g. because of the board overlay file.
https://rcn-ee.net/rootfs/bb.org/testing/2017-09-19/stretch-iot/bone-debian-9.1-iot-armhf-2017-09-19-4gb.img.xz U-Boot SPL 2017.09-00003-g02f3fd3962 (Sep 20 2017 - 14:09:02) Trying to boot from MMC1 U-Boot 2017.09-00003-g02f3fd3962 (Sep 20 2017 - 14:09:02 -0500) CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Model: BeagleBoard.org PocketBeagle <ethaddr> not set. Validating first E-fuse MAC Net: eth0: RGMII MODE Could not get PHY for cpsw: addr 0 cpsw Press SPACE to abort autoboot in 2 seconds board_name=[A335PBGL] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Bad device 0:2 0x82000000 ** ** Bad device 0:2 0x82000000 ** switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2595 bytes read in 27 ms (93.8 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.4.88-ti-r122 ... 8665976 bytes read in 572 ms (14.4 MiB/s) loading /boot/dtbs/4.4.88-ti-r122/am335x-pocketbeagle.dtb ... 71821 bytes read in 145 ms (483.4 KiB/s) uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to enable... loading /boot/initrd.img-4.4.88-ti-r122 ... 5514927 bytes read in 368 ms (14.3 MiB/s) debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] ... debug: [bootz 0x82000000 0x88080000:5426af 0x88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fabd000, end 8ffff6af ... OK Loading Device Tree to 8faa8000, end 8fabc88c ... OK Starting kernel ... [ 0.001144] clocksource_probe: no matching clocksources found [ 2.118518] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 2.227684] omap_voltage_late_init: Voltage driver support not added [ 2.238761] PM: Cannot get wkup_m3_ipc handle [ 2.776365] musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (80, <SessEnd), retry #3, port1 0008010c Debian GNU/Linux 9 beaglebone ttyS0 BeagleBoard.org Debian Image 2017-09-19 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beaglebone login: Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYh-CjPoTELw_RqVzu_YF5eR27c9yMnCUxcaSAs-zA981g%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
