Out of the box, plugging the PB into a USB port a single blue LED turns on and nothing shows up on any PC connected to it.
Is there an OS pre-installed or do I have to use an image on microSD card to boot? Will the USB show up as a serial device or do I have to hard wire the RX and TX pins to a USB TTL-232R-3V3 converter? Can I use an OTG Micro USB adapter to plug in a USB ethernet device? On Friday, September 22, 2017 at 10:16:16 AM UTC-4, RobertCNelson wrote: > > > Console is on T0 Rx/Tx by default > > On powerup (remember to hit the pwr button), you can ssh/serial in > over the usb port. > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1e3c2c35-a60f-4355-a371-c350b141ccb2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
