Can you solve this issue with de Beaglebone Black Industrial? Regards,
El jueves, 4 de agosto de 2016, 14:34:12 (UTC-4), ALex escribió: > > > I have the flasher image on the uSD card from the eLinux link, but when I > hold down the boot button to boot, I do not get any indication on the 4 > LEDs. Nothing, even after 1 minute of holding it down. I confirmed I can > read from the uSD card-- on normal boot, I can read from /boot/uboot just > fine, editing the uEnv.txt file and all. > > I have an element 14 BBB (rev. c). Is it possible that has anything to > do with why I can't boot from uSD card? > > > > On Tuesday, August 2, 2016 at 1:10:18 PM UTC-7, William Hermans wrote: >> >> On Tue, Aug 2, 2016 at 12:43 PM, Lidia Toscano <[email protected]> >>> wrote: >>> >>>> After editing the uEnv.txt file my BBB is still not flashing. The LEDs >>>>> come on and stay lit after only a couple of seconds as though it had been >>>>> flashed. Any other ideas? >>>>> >>>> >>>> Thanks. >>>> >>>> oops right. This could be an older boot loader issue. So, in order to >> boot from the sdcard, you may need to press, and hold down the boot button. >> Which is at the opposite end of the board from the ethernet port, and a >> little to the left, Only button on that side of the board . . >> >> Anyway, heh. Press and hold the button until you see a blink pattern on >> the LEDs, then you can let go. >> >> Let us know if that solves your issue. >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d5a077d1-760d-4a89-b862-f11d1c9a3a25%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
