In my experience, instead of relying on the indicator lights, I use a serial console cable to see the progress on a BBB Industrial. I use a console image to flash the eMMC and that works fine. This should translate to the other images produced by Robert Nelson.
--Luther On Wednesday, October 18, 2017 at 9:43:08 PM UTC+8, Arturo Arenas wrote: > > Can you solve this issue with de Beaglebone Black Industrial? > > Regards, > > El jueves, 4 de agosto de 2016, 14:34:12 (UTC-4), ALex escribió: >> >> >> I have the flasher image on the uSD card from the eLinux link, but when I >> hold down the boot button to boot, I do not get any indication on the 4 >> LEDs. Nothing, even after 1 minute of holding it down. I confirmed I can >> read from the uSD card-- on normal boot, I can read from /boot/uboot just >> fine, editing the uEnv.txt file and all. >> >> I have an element 14 BBB (rev. c). Is it possible that has anything to >> do with why I can't boot from uSD card? >> >> >> >> On Tuesday, August 2, 2016 at 1:10:18 PM UTC-7, William Hermans wrote: >>> >>> On Tue, Aug 2, 2016 at 12:43 PM, Lidia Toscano <[email protected]> >>>> wrote: >>>> >>>>> After editing the uEnv.txt file my BBB is still not flashing. The >>>>>> LEDs come on and stay lit after only a couple of seconds as though it >>>>>> had >>>>>> been flashed. Any other ideas? >>>>>> >>>>> >>>>> Thanks. >>>>> >>>>> oops right. This could be an older boot loader issue. So, in order to >>> boot from the sdcard, you may need to press, and hold down the boot button. >>> Which is at the opposite end of the board from the ethernet port, and a >>> little to the left, Only button on that side of the board . . >>> >>> Anyway, heh. Press and hold the button until you see a blink pattern on >>> the LEDs, then you can let go. >>> >>> Let us know if that solves your issue. >>> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7f3d3f05-f336-4bb4-94d7-9125f9d0ee26%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
