BBBlack, image: debian-7.11-lxde
how:
cd /opt/scripts
git pull
After reboot there are two usb network interfaces (new is usb1). Both ip
addresses are not reachable from windows (no route entry in route print),
usb mass storage is still working.
Some logs:
[ 11.737870] usb0: HOST MAC 04:a3:16:af:a1:6d
[ 11.737981] usb0: MAC 04:a3:16:af:a1:6e
[ 11.738706] usb1: HOST MAC 1c:ba:8c:a2:ed:72
[ 11.738750] usb1: MAC 1c:ba:8c:a2:ed:73
[ 11.775559] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full -
flow control rx/tx
[ 11.775631] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.038548] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 12.117325] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
[ 12.117431] configfs-gadget gadget: high-speed config #1: c
[ 12.117881] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
When I revert scripts to old version:
root@beaglebone:/opt/scripts# git reflog
a5d5f43 HEAD@{0}: pull: Fast-forward
ce39028 HEAD@{1}: pull: Fast-forward
b71b6d7 HEAD@{2}: clone: from https://github.com/RobertCNelson/boot-scripts
root@beaglebone:/opt/scripts# git reset --hard ce39028
then reboot abd usb0 192.168.7.2 is working again.
Best regards
Grzegorz
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/95818b3b-b76a-43cb-bcfa-f861df069ac3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
