I did it. It took 1.5h on my debian virtual machine. Results: - usb network i not available (still no route in route print), + serial over usb is working (it was not available before), - in device management there is working com port "USB serial device COM8" (mentioned above) and there is visible "Gadget serial COM7" defined not exsisted device, - big problems with RTC over I2C - almost not readable (before kernel upgrade, there was not as many problems with RTC over i2c), - old problem with ethernet is back
[ 158.682964] rtc-ds1307 1-0068: read error -121 [ 160.284608] rtc-ds1307 1-0068: read error -121 [ 201.901327] cpsw 4a100000.ethernet eth0: Link is Down [ 402.656641] rtc-ds1307 1-0068: read error -110 [ 404.291265] rtc-ds1307 1-0068: read error -121 [ 407.762364] rtc-ds1307 1-0068: read error -121 [ 408.601046] rtc-ds1307 1-0068: read error -121 [ 411.371277] omap_i2c 4802a000.i2c: controller timed out [ 411.376635] rtc-ds1307 1-0068: read error -110 [ 413.062533] rtc-ds1307 1-0068: read error -121 [ 413.983043] rtc-ds1307 1-0068: read error -121 I didn't make any changes to kernel configuration (I did save, then exit). PS. My OS is Windows 10 Fall Creators Update. Did I miss something while compiling kernel? W dniu poniedziałek, 6 listopada 2017 19:07:13 UTC+1 użytkownik RobertCNelson napisał: > > On Mon, Nov 6, 2017 at 11:34 AM, Grzegorz G <[email protected] > <javascript:>> wrote: > > Thank you very much :) > > Now latest is 4.4.71-bone17 (via ./update_kernel.sh --bone-kernel > --lts-4_4) > > Ouch, yeah i stopped doing wheezy (7.x) builds when stretch (9.x) hit > stable.. > > > Will 4.4.96-bone20 be available tomorrow or I need to change update > > parameters? > > voodoo@hades:~$ git clone -b am33x-v4.4 > https://github.com/RobertCNelson/bb-kernel/ --depth=1 > voodoo@hades:~$ cd bb-kernel/ > voodoo@hades:~/bb-kernel$ ./build_deb.sh > > Then copy the ./deploy/linux-image*.deb to your beagle and run: > > sudo dpkg -i linux-image*.deb > sudo reboot > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b9f307e0-822d-460a-9323-26d5a8c0be3b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
