Hi! This is my first time here and I wanted some help to setup my BBB What's the best way to get a Debian 9.2 - Kernel 4.14 image with support for U-Boot device tree overlays (https://github.com/beagleboard/bb.org-overlays/tree/master/tools/beaglebone-universal-io) while also getting the SGX driver?
I have investigated a lot but I need to make sure that this "guide" is correct (since I don't wanna make any irreparable mistake) I suppose that I need to get the Stretch Snapshot lxqt - Flasher: (stretch-lxqt) (All BeagleBone Variants with a 4GB eMMC) image from: https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Debian_Image_Testing_Snapshots This comes with Kernel 4.9 so I would need to upgrade following the instructions in: https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Kernel_Opions And I would install Mainline 4.14 After that, I would follow this instructions to get the SGX driver: https://elinux.org/BeagleBoardDebian#SGX_BeagleBone.2FBeagleBone_Black But instead of checking out the 4.4 branch I would checkout the 4.14 branch: https://github.com/RobertCNelson/bb-kernel/tree/am33x-v4.14 Finally I would upgrade U-Boot https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays And hopefully I wouldn't break anything. Is this guide correct? Am I missing something? Thanks in advance -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e87bc8f6-0d1a-478e-9667-779869eb0e35%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
