Hi, I'm at the same place as you, did you ever get this going?
Best regards Ole Nissen Den søndag den 26. november 2017 kl. 01.49.00 UTC+1 skrev Pablo Mayobre: > > > Hi! This is my first time here and I wanted some help to setup my BBB > > What's the best way to get a Debian 9.2 - Kernel 4.14 image with support > for U-Boot device tree overlays > (https://github.com/beagleboard/bb.org-overlays/tree/master/tools/beaglebone-universal-io) > > while also getting the SGX driver? > > I have investigated a lot but I need to make sure that this "guide" is > correct (since I don't wanna make any irreparable mistake) > > I suppose that I need to get the Stretch Snapshot lxqt - Flasher: > (stretch-lxqt) (All BeagleBone Variants with a 4GB eMMC) image from: > > https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Debian_Image_Testing_Snapshots > > This comes with Kernel 4.9 so I would need to upgrade following the > instructions in: > https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Kernel_Opions > And I would install Mainline 4.14 > > After that, I would follow this instructions to get the SGX driver: > https://elinux.org/BeagleBoardDebian#SGX_BeagleBone.2FBeagleBone_Black > > But instead of checking out the 4.4 branch I would checkout the 4.14 > branch: > https://github.com/RobertCNelson/bb-kernel/tree/am33x-v4.14 > > Finally I would upgrade U-Boot > https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays > > And hopefully I wouldn't break anything. Is this guide correct? Am I > missing something? > Thanks in advance > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/76599cd5-8f52-4602-bf30-23447ff9e0b1%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
