Wondering how to change the mode of P1_28 to CAN0RX and P1_26 to CAN0TX as shown in the wiki:
https://github.com/beagleboard/pocketbeagle/wiki/Peripherals#can It doesn't appear as though CAN is an option for those pins? --- debian@beaglebone:/$ config-pin P1_28 can Invalid mode: can debian@beaglebone:/$ config-pin -l P1_28 default gpio gpio_pu gpio_pd spi i2c pru_uart debian@beaglebone:/$ config-pin -l P1_26 default gpio gpio_pu gpio_pd spi i2c pru_uart debian@beaglebone:/$ --- Apologies if this is covered somewhere, I am still getting up to speed on this cool little board. Thanks in advance! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2c2e1640-0b16-4485-8047-dc72055c3810%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
