On Mon, Dec 4, 2017 at 9:10 PM, <[email protected]> wrote: > Wondering how to change the mode of P1_28 to CAN0RX and P1_26 to CAN0TX as > shown in the wiki: > > https://github.com/beagleboard/pocketbeagle/wiki/Peripherals#can > > It doesn't appear as though CAN is an option for those pins? > > --- > debian@beaglebone:/$ config-pin P1_28 can > Invalid mode: can > debian@beaglebone:/$ config-pin -l P1_28 > default gpio gpio_pu gpio_pd spi i2c pru_uart > debian@beaglebone:/$ config-pin -l P1_26 > default gpio gpio_pu gpio_pd spi i2c pru_uart > debian@beaglebone:/$ > > --- > > Apologies if this is covered somewhere, I am still getting up to speed on > this cool little board. Thanks in advance!
sudo /opt/scripts/tools/version.sh Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYhFn3v8BJdX98TS6422BZ9ijowULcLU5QpaBfgersRDmA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
