On Monday, December 11, 2017 at 4:18:31 PM UTC-5, RobertCNelson wrote: > > > btrfs got added in u-boot v2017.11... ;) > > > https://github.com/u-boot/u-boot/commit/0c936ee3194ac5b533a18fcd08e5d285853af5fe#diff-09d710108823b360adf225b17cef57f9 > > > Doesn't seem to work....
U-Boot 2018.01-rc1-00002-g87ef84e094 (Dec 06 2017 - 14:58:04 -0600), Build: jenkins-github_Bootloader-Builder-16 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Board: BeagleBone Black <ethaddr> not set. Validating first E-fuse MAC BeagleBone Black: Model: Element14 BeagleBone Black Industrial: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds board_name=[A335BNLT] ... board_rev=[EIA0] ... Card did not respond to voltage select! mmc_init: -95, time 13 Card did not respond to voltage select! mmc_init: -95, time 12 Card did not respond to voltage select! mmc_init: -95, time 13 gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 Card did not respond to voltage select! mmc_init: -95, time 13 Card did not respond to voltage select! mmc_init: -95, time 13 switch to partitions #0, OK mmc1(part 0) is current device Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Checking for: /uEnv.txt ... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Checking for: /boot.scr ... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Checking for: /boot/boot.scr ... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Checking for: /boot/uEnv.txt ... Failed to mount ext2 filesystem... -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e79d301b-6e16-477e-8428-e3c61e385485%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
