Hello.
I am trying to use custom u-boot that will be run from mmc/sdcard.
For this did next step:
1. clone it:
> git clone git://git.denx.de/u-boot.git u-boot/
2. checkout to new version:
> git checkout v2017.11
>
2. configure it:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_boneblack_defconfig
>
3. build it:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
4. than copy MLO and u-boot.img to mmc:
> cp MLO u-boot.img /media/inisider/boot/
>
5. insert microsd to beagleboneblack slot than press ButtonSwitch (S2) and
poweron BBB:
> U-Boot 2017.09-00002-g0f3f1c7907 (Oct 09 2017 - 15:30:22 -0500), Build:
> jenkins-github_Bootloader-Builder-607
>
> CPU : AM335X-GP rev 2.1
> I2C: ready
> DRAM: 512 MiB
> No match for driver 'omap_hsmmc'
> No match for driver 'omap_hsmmc'
> Some drivers were not found
> Reset Source: Power-on reset has occurred.
> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
> Using default environment
>
> Board: BeagleBone Black
> <ethaddr> not set. Validating first E-fuse MAC
> BeagleBone Black:
> BeagleBone: cape eeprom: i2c_probe: 0x54:
> BeagleBone: cape eeprom: i2c_probe: 0x55:
> BeagleBone: cape eeprom: i2c_probe: 0x56:
> BeagleBone: cape eeprom: i2c_probe: 0x57:
> Net: eth0: MII MODE
> cpsw
> Press SPACE to abort autoboot in 2 seconds
>
Information about my microsdcard:
> sudo fdisk /dev/sdc
>
> Command (m for help): p
>
> Disk /dev/sdc: 7744 MB, 7744782336 bytes
> 239 heads, 62 sectors/track, 1020 cylinders, total 15126528 sectors
> Units = sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disk identifier: 0x00053946
>
> Device Boot Start End Blocks Id System
> /dev/sdc1 2048 206847 102400 b W95 FAT32
> /dev/sdc2 206848 2254847 1024000 83 Linux
>
This is not U-boot that was compiled by me .
What can be a problem?
- Add to Phrasebook
- k
- Create a new wordlist...
- Copy
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/693b5aad-c941-4b47-b2e0-1968e44065ea%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
