Hello. I am trying to use custom u-boot that will be run from mmc/sdcard. For this did next step: 1. clone it:
> git clone git://git.denx.de/u-boot.git u-boot/ 2. checkout to new version: > git checkout v2017.11 > 2. configure it: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_boneblack_defconfig > 3. build it: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- 4. than copy MLO and u-boot.img to mmc: > cp MLO u-boot.img /media/inisider/boot/ > 5. insert microsd to beagleboneblack slot than press ButtonSwitch (S2) and poweron BBB: > U-Boot 2017.09-00002-g0f3f1c7907 (Oct 09 2017 - 15:30:22 -0500), Build: > jenkins-github_Bootloader-Builder-607 > > CPU : AM335X-GP rev 2.1 > I2C: ready > DRAM: 512 MiB > No match for driver 'omap_hsmmc' > No match for driver 'omap_hsmmc' > Some drivers were not found > Reset Source: Power-on reset has occurred. > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Using default environment > > Board: BeagleBone Black > <ethaddr> not set. Validating first E-fuse MAC > BeagleBone Black: > BeagleBone: cape eeprom: i2c_probe: 0x54: > BeagleBone: cape eeprom: i2c_probe: 0x55: > BeagleBone: cape eeprom: i2c_probe: 0x56: > BeagleBone: cape eeprom: i2c_probe: 0x57: > Net: eth0: MII MODE > cpsw > Press SPACE to abort autoboot in 2 seconds > Information about my microsdcard: > sudo fdisk /dev/sdc > > Command (m for help): p > > Disk /dev/sdc: 7744 MB, 7744782336 bytes > 239 heads, 62 sectors/track, 1020 cylinders, total 15126528 sectors > Units = sectors of 1 * 512 = 512 bytes > Sector size (logical/physical): 512 bytes / 512 bytes > I/O size (minimum/optimal): 512 bytes / 512 bytes > Disk identifier: 0x00053946 > > Device Boot Start End Blocks Id System > /dev/sdc1 2048 206847 102400 b W95 FAT32 > /dev/sdc2 206848 2254847 1024000 83 Linux > This is not compiled by me U-boot. What can be a problem? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7e42a5f2-a2df-4fc0-b198-67830925eaef%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
