> > >>> >> Robert, thanks for the input so far. I had just come across this post >> >> *https://groups.google.com/forum/#!category-topic/beagleboard/boot/lS8QlNV8JCc >> >> <https://groups.google.com/forum/#!category-topic/beagleboard/boot/lS8QlNV8JCc>* >> >> And tried the steps you outlined in there but with no joy. I've tried >> running the script >> >> sudo /opt/scripts/tools/developers/update_initrd.sh >> >> but again, not luck. I'm not actually getting any reference to pru_rproc >> at all from within the dmesg log, apart from in relation to the PM >> peripheral (whatever that is) - very odd. >> > > I'm going to try again today with the 8.7 image from March '17 >
An update - a clean install of 8.7 with the stock uEnv.txt results in the usual pru-rproc stuff in dmesg. Edit the file to enable u-boot overlays and the pru-rproc subsystem doesn't load at boot time. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e42df4c8-7c04-4e16-9752-24fac841ff43%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
