On Wednesday, 17 January 2018 10:41:56 UTC, Hugh Frater wrote: > > >>>> >>> Robert, thanks for the input so far. I had just come across this post >>> >>> *https://groups.google.com/forum/#!category-topic/beagleboard/boot/lS8QlNV8JCc >>> >>> <https://groups.google.com/forum/#!category-topic/beagleboard/boot/lS8QlNV8JCc>* >>> >>> And tried the steps you outlined in there but with no joy. I've tried >>> running the script >>> >>> sudo /opt/scripts/tools/developers/update_initrd.sh >>> >>> but again, not luck. I'm not actually getting any reference to pru_rproc >>> at all from within the dmesg log, apart from in relation to the PM >>> peripheral (whatever that is) - very odd. >>> >> >> I'm going to try again today with the 8.7 image from March '17 >> > > An update - a clean install of 8.7 with the stock uEnv.txt results in the > usual pru-rproc stuff in dmesg. Edit the file to enable u-boot overlays and > the pru-rproc subsystem doesn't load at boot time. >
Robert, any idea why pru_ecap has gone from the config-pin options for P9_42? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b30a7562-306b-4432-8cae-fe5bef837838%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
