Hello all,

I've been experimenting a bit with a working PocketBeagle. After possibly 
modifying uEnv.txt and executing shutdown -r now in the Cloud9 IDE terminal 
window, the board didn't restart successfully and stopped appearing as the 
storage device. 

After that I cleaned the SD card with diskpart and flashed the image anew 
with Etcher (the image used is 
bone-debian-9.3-iot-armhf-2018-01-28-4gb.img.xz, but later I've also tested 
bone-debian-9.3-console-armhf-2018-02-18-1gb.img.xz). The image does appear 
on the SD card as a Debian file system, so I believe it's correctly flashed.

The board with the newly flashed SD-card doesn't appear neither as a 
storage device, nor even in the Device Manager, as if there's nothing 
connected. Only the power LED is on and the board keeps heating. When the 
board is connected to the PC without an SD-card, Device Manager and 
USBlyzer do recognize it as AM335x USB. 

How can I restore the board? Is there a way to test whether it's still a 
working board? 
Thanks

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/1c755023-a22f-454a-a4e7-d02233829a19%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to