try a new image on a new sd card.
if that dont fix it its a tough diagnosis over the internet
On 2/22/2018 7:19 AM, Loader wrote:
> Hello all,
> I've been experimenting a bit with a working PocketBeagle. After
> possibly modifying uEnv.txt and executing shutdown -r now in the
> Cloud9 IDE terminal window, the board didn't restart successfully and
> stopped appearing as the storage device.
> After that I cleaned the SD card with diskpart and flashed the image
> anew with Etcher (the image used
> is bone-debian-9.3-iot-armhf-2018-01-28-4gb.img.xz, but later I've
> also tested bone-debian-9.3-console-armhf-2018-02-18-1gb.img.xz). The
> image does appear on the SD card as a Debian file system, so I believe
> it's correctly flashed.
> The board with the newly flashed SD-card doesn't appear neither as a
> storage device, nor even in the Device Manager, as if there's nothing
> connected. Only the power LED is on and the board keeps heating. When
> the board is connected to the PC without an SD-card, Device Manager
> and USBlyzer do recognize it as AM335x USB.
> How can I restore the board? Is there a way to test whether it's still
> a working board?
> For more options, visit http://beagleboard.org/discuss
> You received this message because you are subscribed to the Google
> Groups "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to beagleboard+unsubscr...@googlegroups.com
> To view this discussion on the web visit
> For more options, visit https://groups.google.com/d/optout.
For more options, visit http://beagleboard.org/discuss
You received this message because you are subscribed to the Google Groups
To unsubscribe from this group and stop receiving emails from it, send an email
To view this discussion on the web visit
For more options, visit https://groups.google.com/d/optout.