1) The TPS65217D came out after the initial design was done. 2) The DDR3L can run at 1.5V without issue.
3) The SW can set the voltage to 1.35V after power up. Gerald From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of shelby.teknolog...@gmail.com Sent: Tuesday, April 3, 2018 9:37 PM To: BeagleBoard <beagleboard@googlegroups.com> Subject: [beagleboard] Schematic I was looking at the schematic and noticed two things. 1) They are using the TPS65217C PMIC 2) The DDR3L is based on a 1.35 power source Why are you not using the TPS65217D and applying the right power to the DDR3L? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com<mailto:beagleboard+unsubscr...@googlegroups.com>. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a4853a75-4024-49d0-8fa8-cb35a512feb9%40googlegroups.com<https://groups.google.com/d/msgid/beagleboard/a4853a75-4024-49d0-8fa8-cb35a512feb9%40googlegroups.com?utm_medium=email&utm_source=footer>. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/664172f01044470bb5e37b69a87fc100%40winhexbeus11.winus.mail. For more options, visit https://groups.google.com/d/optout.
