please reply to my post also. I am new here. I am looking for a solution On Tue, Aug 7, 2018 at 7:36 PM, Robert Nelson <robertcnel...@gmail.com> wrote:
> On Tue, Aug 7, 2018 at 11:16 AM <kamilada...@gmail.com> wrote: > > > > Hi, > > > > I try to prepare my Beagle Bone black image to new hardware using this > gist: https://gist.github.com/RobertCNelson/39faf80ddc9fcefae74dce2c6ca2eb > 45 . I was update from Linux kernel 3.8.13-bone59 to version > 3.8.13-bone86. When I start from SD card linux is booting and working well. > My problem is that flasher to eMMC not working. Script cannot find Source > and Destination devices and throw kernel panic. I'm posting below logs with > enabled flashing on booting. > > U-Boot SPL 2014.07-rc4-00015-g5bcd74d (Jul 04 2014 - 16:03:33) > > reading u-boot.img > > reading u-boot.img > > > > > > U-Boot 2014.07-rc4-00015-g5bcd74d (Jul 04 2014 - 16:03:33), Build: > jenkins-github_Bootloader-Builder-345 > > > > I2C: ready > > DRAM: 512 MiB > > NAND: 0 MiB > > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > > *** Warning - readenv() failed, using default environment > > > > Net: <ethaddr> not set. Validating first E-fuse MAC > > cpsw, usb_ether > > Hit any key to stop autoboot: 0 > > gpio: pin 53 (gpio 53) value is 1 > > switch to partitions #0, OK > > mmc0 is current device > > gpio: pin 54 (gpio 54) value is 1 > > SD/MMC found on device 0 > > gpio: pin 55 (gpio 55) value is 1 > > 373 bytes read in 16 ms (22.5 KiB/s) > > Loaded environment from /boot/uEnv.txt > > Checking if uname_r is set in /boot/uEnv.txt... > > gpio: pin 56 (gpio 56) value is 1 > > loading /boot/vmlinuz-3.8.13-bone86 ... > > 5580368 bytes read in 337 ms (15.8 MiB/s) > > loading /boot/dtbs/3.8.13-bone86/am335x-boneblack.dtb ... > > 26118 bytes read in 28 ms (910.2 KiB/s) > > Kernel image @ 0x82000000 [ 0x000000 - 0x552650 ] > > ## Flattened Device Tree blob at 88000000 > > Booting using the fdt blob at 0x88000000 > > Loading Device Tree to 8fff6000, end 8ffff605 ... OK > > no "initrd" > > run: > > sudo update-initramfs -ck `uname -r` > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/CAOCHtYhu9qiwQP-BawJCD1PEqmZnMUROD9rq-Ao0% > 2BisfrT1Gsw%40mail.gmail.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAEMqNhAuZNzj7O2wAoJUOuRVJpSTZLy5sGx-oFW5jbOeF7h3xg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.