Would it maybe be helpful to add the above step to the kernel upgrade sections of the following procedure pages or other pages (for specific kernel versions)?
https://www.digikey.com/eewiki/display/linuxonarm/BeagleBone+Black https://www.digikey.com/eewiki/display/linuxonarm/BeagleBoard-X15 https://www.digikey.com/eewiki/display/linuxonarm/* I THINK you said that "newer kernels" don't need this step or will no longer need this step, as they don't use initramfs, right? Thanks! On Tuesday, August 7, 2018 at 11:37:25 AM UTC-5, RobertCNelson wrote: > > On Tue, Aug 7, 2018 at 11:16 AM <[email protected] <javascript:>> wrote: > > > > Hi, > > > > I try to prepare my Beagle Bone black image to new hardware using this > gist: > https://gist.github.com/RobertCNelson/39faf80ddc9fcefae74dce2c6ca2eb45 . > I was update from Linux kernel 3.8.13-bone59 to version 3.8.13-bone86. When > I start from SD card linux is booting and working well. My problem is that > flasher to eMMC not working. Script cannot find Source and Destination > devices and throw kernel panic. I'm posting below logs with enabled > flashing on booting. > > U-Boot SPL 2014.07-rc4-00015-g5bcd74d (Jul 04 2014 - 16:03:33) > > reading u-boot.img > > reading u-boot.img > > > > > > U-Boot 2014.07-rc4-00015-g5bcd74d (Jul 04 2014 - 16:03:33), Build: > jenkins-github_Bootloader-Builder-345 > > > > I2C: ready > > DRAM: 512 MiB > > NAND: 0 MiB > > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > > *** Warning - readenv() failed, using default environment > > > > Net: <ethaddr> not set. Validating first E-fuse MAC > > cpsw, usb_ether > > Hit any key to stop autoboot: 0 > > gpio: pin 53 (gpio 53) value is 1 > > switch to partitions #0, OK > > mmc0 is current device > > gpio: pin 54 (gpio 54) value is 1 > > SD/MMC found on device 0 > > gpio: pin 55 (gpio 55) value is 1 > > 373 bytes read in 16 ms (22.5 KiB/s) > > Loaded environment from /boot/uEnv.txt > > Checking if uname_r is set in /boot/uEnv.txt... > > gpio: pin 56 (gpio 56) value is 1 > > loading /boot/vmlinuz-3.8.13-bone86 ... > > 5580368 bytes read in 337 ms (15.8 MiB/s) > > loading /boot/dtbs/3.8.13-bone86/am335x-boneblack.dtb ... > > 26118 bytes read in 28 ms (910.2 KiB/s) > > Kernel image @ 0x82000000 [ 0x000000 - 0x552650 ] > > ## Flattened Device Tree blob at 88000000 > > Booting using the fdt blob at 0x88000000 > > Loading Device Tree to 8fff6000, end 8ffff605 ... OK > > no "initrd" > > run: > > sudo update-initramfs -ck `uname -r` > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/704d49ba-182d-4287-93a7-227c401bf3e1%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
