So then data is coming from the IQ demodulator at 40 MHz on the USB 3.0 bus from the b210, and you 'd like to have it fill up a buffer via DMA, and then generate an interrupt for one or both C66 DSP's to demodulate, filter, downsample, filter some more, perform error correction coding, until you end up with a data stream??
On Wednesday, August 8, 2018 at 8:18:27 AM UTC-5, syed hashir wrote: > > I want to use it to capture IQ data. > > On Tuesday, August 7, 2018 at 7:16:52 PM UTC+3, syed hashir wrote: >> >> Hello all, >> >> I want to use X15 with usrp b210,b205 and 2932. My question is if I >> connect usb series usrp with high speed 3.0 port of X15. then Will it >> support the highest sampling rate on USRP?. What is the maximum I can >> acheive?. Even with core i7 high speed ports it gives 40 MHZ hardly and >> sometimes overflows and underruns. >> >> Another question. What is the maximum USB 3.0, Esata, main Data Bus >> (through which ports and emmc is connected) and eMMC read and write speed >> on X15 board?. >> >> I want to use it as a single board computer for my mini usrp b205. I want >> to buy it soon. Need suggestions urgently. Whether to buy this thing for >> USRP or not. >> >> >> >> Thanks, >> >> Hashir >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e991213f-d22e-4f28-953a-37255849d13d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.