Well, is the usrp able to give you baseband data? I did some very very rough benchmarks for each of the 2 C66DSP's, several months ago showing
Each C66DSP: Fs = 100kHz. 60, 152 tap FIR filters Close to 100% utilization for each C66 core. Assuming C66's are clocked at 750 MHz. There's also a benchmark document from TI for the C66 (Think it is one of the technical documents you can view associated with the am5728 processor on TI's sites). That document showed: 256 Point FFT 1782, c66x cycles Execution time = 2.373 uS at 750 MHz clock speed. If you're IQ samples are at Fs = 40 MHz, depending on what you want the C66's to do with them then this MAYBE an issue for the C66 DSP's,... On Wednesday, August 8, 2018 at 8:38:18 AM UTC-5, syed hashir wrote: > > Thing is USRP can transmit data through USB 3.0 at max speed it can. But > Can this board process it ?. It should because it has USB 3.0 port. I am > not sure about the Bus speed of the board and other things > > On Tuesday, August 7, 2018 at 7:16:52 PM UTC+3, syed hashir wrote: >> >> Hello all, >> >> I want to use X15 with usrp b210,b205 and 2932. My question is if I >> connect usb series usrp with high speed 3.0 port of X15. then Will it >> support the highest sampling rate on USRP?. What is the maximum I can >> acheive?. Even with core i7 high speed ports it gives 40 MHZ hardly and >> sometimes overflows and underruns. >> >> Another question. What is the maximum USB 3.0, Esata, main Data Bus >> (through which ports and emmc is connected) and eMMC read and write speed >> on X15 board?. >> >> I want to use it as a single board computer for my mini usrp b205. I want >> to buy it soon. Need suggestions urgently. Whether to buy this thing for >> USRP or not. >> >> >> >> Thanks, >> >> Hashir >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5517fbbd-c8f5-4c21-9782-d81b29ee8946%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.