I am following this guide to install Linaro on my Ubuntu 18.04 machine: https://www.digikey.com/eewiki/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-ARMCrossCompiler:GCC <https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-LinuxKernel>
Unlike the guide, I want to have the latest Linaro version. Thus, these are the commands I use: sudo apt-get install aptitude sudo apt-get install gcc-multilib wget -c https://releases.linaro.org/components/toolchain/binaries/latest/arm-linux-gnueabihf/gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabihf.tar.xz --no-check-certificate tar xf gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabihf.tar.xz export CC=`pwd`/gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf- {CC}gcc --version It fails at the last line, complaining: {CC}gcc: command not found Can somebody enlighten me? What have I done wrong? This process previously failed when I used Linaro 6.4.1 as in the guide. Thank you so much in advance. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/32ea3be4-b951-4fab-83ff-a1cb9e2f6297%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
