Solved, it actually does not configure in the DOT... On Wednesday, September 12, 2018 at 3:48:04 PM UTC+1, Chao wrote: > > The exposed Cyclops method is employed to guarantee a synchronised speed > between CPU and RPU of the Beaglebone Black. While it always says the > error when configures pins through all required overlays have been > installed and loaded as the README introduction. > > > /sys/devices/ocp.*/P8_46_pinmux.*/state: No such file or directory > > > Overlays are loaded: > > 0: 54:PF--- > 1: 55:PF--- > 2: 56:PF--- > 3: 57:PF--- > 4: ff:P-O-- Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G > 5: ff:P-O-- Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI > 6: ff:P-O-- Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN > 7: ff:P-O-L Override Board Name,00A0,Override Manuf,NESL-PRU > 8: ff:P-O-L Override Board Name,00A0,Override Manuf,NESL-PRU-PINS > 9: ff:P-O-L Override Board Name,00A0,Override Manuf,NESL-PRU-QOT > > > In my view, the problem probably occurs in the NESL-PRU-PINS, which I > cannot find out its dts file in upload files, thanks. > >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/536449d1-dd32-40d1-925f-7b6d3f06b0d9%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
