On Wed, Oct 17, 2018 at 12:58 PM dwviel via BeagleBoard <[email protected]> wrote: > > I want to connect several individual wires to the BBB p9 header. I would > rather not use an entire 46pin header to do this. Rather, I was thinking of > finding some kind of single pin solder socket to solder on to the end of each > wire and then push the pin into the appropriate header receiver pin number. > Does anyone know of such a solder socket with the correct gold plated square > pin to use? I tried to search digikey, etc. but don't even know what the > correct name for such a device would be.
Like these: https://www.digikey.com/product-detail/en/adafruit-industries-llc/758/1528-1154-ND/5353614 made by Adafruit.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgNfqu92HwGM7w-An67%3DEZpFbMNTe4pD6B7xwX49wsW9w%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
