I think I can build what I want by using these: https://www.digikey.com/product-detail/en/te-connectivity-amp-connectors/5-87623-4/A100889CT-ND/2259558
Just solder to the end and maybe a shrink tube covering to provide insulation. On Wednesday, October 17, 2018 at 1:58:39 PM UTC-4, [email protected] wrote: > > I want to connect several individual wires to the BBB p9 header. I would > rather not use an entire 46pin header to do this. Rather, I was thinking > of finding some kind of single pin solder socket to solder on to the end of > each wire and then push the pin into the appropriate header receiver pin > number. Does anyone know of such a solder socket with the correct gold > plated square pin to use? I tried to search digikey, etc. but don't even > know what the correct name for such a device would be. > > Thanks, > David > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2426358d-44c3-4004-84e4-b4f179016b0b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
