Hello Joshua, Some time ago I was analysing the files provided here: http://elinux.org/Beagleboard:BeagleBoneBlack#Board_Revisions_and_Changes it was posted the Altium files of board revB4 (BBB revA5B). I needed the PCB revB6 (refer to BBB RevC). I read the "Board Revisions and Changes" section and I identified the changes at the schematic, nothing too relevant. Thus the revB4 (Altium files provided) would be a good base for my design.
Analyzing Altium file "BeagleBone_Black_RevB4.PcbDoc" I found some issues (until now): - There is a missing Via in net "VDDS" near R9; - The fiducials are through role instead smd pads; - Some designators on bottom silkscreen are in wrong place; - Is missing the teardrops on all nets; I hope it could help you. Best regards, Kleber. Em qui, 25 de out de 2018 às 08:49, <[email protected]> escreveu: > Hi OMag, > > Are the Beaglebone Black Altuim files you mentioned available to download > somewhere? If yes would you provide a link please? > > Cheers > Josh > > On Thursday, October 18, 2018 at 11:55:00 PM UTC+11, OMag wrote: >> >> HI >> >> You've probably sorted this by now but in case anyone is interested, I >> have updated the Beaglebone black files to REV C in Altium from REV B4. >> >> On Friday, March 24, 2017 at 9:16:14 PM UTC+2, [email protected] >> wrote: >>> >>> Hi [email protected], >>> >>> I'm having same difficult as you to use the BeagleBoneBlack as base of >>> my hardware in Altium. Here: >>> http://elinux.org/Beagleboard:BeagleBoneBlack#Board_Revisions_and_Changes >>> <http://www.google.com/url?q=http%3A%2F%2Felinux.org%2FBeagleboard%3ABeagleBoneBlack%23Board_Revisions_and_Changes&sa=D&sntz=1&usg=AFQjCNFFOAnQZq4OzY-aomrgq9TWgh6OIg> >>> was posted the Altium files of board revB4 (BBB revA5B). We need the PCB >>> revB6 (refer to BBB RevC). I read the "Board Revisions and Changes" section >>> and I identified the changes at the schematic, nothing too relevant. Thus >>> the revB4 (Altium files provided) would be a good base for my design. >>> >>> Analyzing Altium file "BeagleBone_Black_RevB4.PcbDoc" I found some >>> issues (until now): >>> - There is a missing Via in net "VDDS" near R9; >>> - The fiducials are through role instead smd pads; >>> - Some designators on bottom silkscreen are in wrong place; >>> - Is missing the teardrops on all nets; >>> >>> Did you have some progress to obtain good and actualized Altium files? >>> >>> Regards, >>> >>> Kleber. >>> >>> Em terça-feira, 7 de março de 2017 16:17:09 UTC-3, >>> [email protected] escreveu: >>>> >>>> Hi all, >>>> >>>> I am the lead electrical engineer for a small company based in New York >>>> State. We have been using both the Beaglebone Green and Beaglebone Black >>>> internally for hardware development purposes for the past couple of months >>>> for an upcoming product. We are early in the process of transitioning to a >>>> production-grade single board hardware design for said product. >>>> >>>> I am looking for CAD files for the Beaglebone Black Rev C to use as a >>>> starting point in the board design process. Can anyone here point me >>>> towards for provide me with Altium Designer files for the BeagleBone Black >>>> Rev C? We do not use Cadence Allegro to design our boards, and have no way >>>> of converting the available OrCAD/Allegro CAD files to an Altium Designer >>>> compatible format. >>>> >>>> I would much rather not have to redesign a complicated & nontrivial >>>> board layout for an open-source hardware product such as this, especially >>>> given that the open-source nature of BeagleBone was the most motivating >>>> factor in choosing it as a development and prototyping tool. >>>> >>>> Note that we are not modifying any part of the BeagleBone Black's >>>> design (except removing the 2X23 female headers and HDMI hardware). We are >>>> using it as a base and adding additional functionality via peripheral >>>> components that are integrated on the same board. >>>> >>>> Thank you for any help that you can provide. >>>> >>>> I look forward to hearing back, >>>> James >>>> >>>> *Disclaimer: I fully understand that these files would come as is, with >>>> no warranty or guarantee of suitability or merchantability for any purpose. >>>> >>>> **There is a separate thread for BeagleBone Green related responses. >>>> >>>> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/-J5zEaZEJSM/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/c0db53df-9e8d-4082-8dbd-a724a53dcd8b%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/c0db53df-9e8d-4082-8dbd-a724a53dcd8b%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- *Kleber Reis Gouveia Júnior* Engenheiro Eletrônico - CREA PE050676 Email: [email protected] Site: http://kleberrgouveia.wixsite.com/home Tel: +55 (81) 98720-6192 Skype: k.gouveia -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHVLNnDD0XPo%3DAnpjy%2BmVNWXeZFgmPmnE40m2%2BuxODkg4gu8Hw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
