Hello. Very interesting). Tell me where can I download these files? Thanks in advance.
Best regards, Dmitry. четверг, 18 октября 2018 г., 15:55:00 UTC+3 пользователь OMag написал: > > HI > > You've probably sorted this by now but in case anyone is interested, I > have updated the Beaglebone black files to REV C in Altium from REV B4. > > On Friday, March 24, 2017 at 9:16:14 PM UTC+2, [email protected] wrote: >> >> Hi [email protected], >> >> I'm having same difficult as you to use the BeagleBoneBlack as base of my >> hardware in Altium. Here: >> http://elinux.org/Beagleboard:BeagleBoneBlack#Board_Revisions_and_Changes >> was posted the Altium files of board revB4 (BBB revA5B). We need the PCB >> revB6 (refer to BBB RevC). I read the "Board Revisions and Changes" section >> and I identified the changes at the schematic, nothing too relevant. Thus >> the revB4 (Altium files provided) would be a good base for my design. >> >> Analyzing Altium file "BeagleBone_Black_RevB4.PcbDoc" I found some issues >> (until now): >> - There is a missing Via in net "VDDS" near R9; >> - The fiducials are through role instead smd pads; >> - Some designators on bottom silkscreen are in wrong place; >> - Is missing the teardrops on all nets; >> >> Did you have some progress to obtain good and actualized Altium files? >> >> Regards, >> >> Kleber. >> >> Em terça-feira, 7 de março de 2017 16:17:09 UTC-3, [email protected] >> escreveu: >>> >>> Hi all, >>> >>> I am the lead electrical engineer for a small company based in New York >>> State. We have been using both the Beaglebone Green and Beaglebone Black >>> internally for hardware development purposes for the past couple of months >>> for an upcoming product. We are early in the process of transitioning to a >>> production-grade single board hardware design for said product. >>> >>> I am looking for CAD files for the Beaglebone Black Rev C to use as a >>> starting point in the board design process. Can anyone here point me >>> towards for provide me with Altium Designer files for the BeagleBone Black >>> Rev C? We do not use Cadence Allegro to design our boards, and have no way >>> of converting the available OrCAD/Allegro CAD files to an Altium Designer >>> compatible format. >>> >>> I would much rather not have to redesign a complicated & nontrivial >>> board layout for an open-source hardware product such as this, especially >>> given that the open-source nature of BeagleBone was the most motivating >>> factor in choosing it as a development and prototyping tool. >>> >>> Note that we are not modifying any part of the BeagleBone Black's design >>> (except removing the 2X23 female headers and HDMI hardware). We are using >>> it as a base and adding additional functionality via peripheral components >>> that are integrated on the same board. >>> >>> Thank you for any help that you can provide. >>> >>> I look forward to hearing back, >>> James >>> >>> *Disclaimer: I fully understand that these files would come as is, with >>> no warranty or guarantee of suitability or merchantability for any purpose. >>> >>> **There is a separate thread for BeagleBone Green related responses. >>> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6bf65d39-798d-4e0c-a94a-bcedf8b12b27%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
