The board is being powered off the micro USB port from my computer at the moment.
The voltage from VI is 5 Volts and VB is 0 Volts. ID is about .8 Volts. I do have 5 Volts on the USB. I would be interested in seeing those KiCad projects if possible! Falcon doesn't seem to be seeing the adapter. Thanks, Devon On Monday, October 29, 2018 at 2:26:13 PM UTC-4, [email protected] wrote: > > Hello Everyone! > > I am currently working on a project with Falcon Christmas on the Pocket > Beagle. I have a USB WIFI dongle to add WIFI to the pocket beagle. > > I was following this guide to add the USB type A to it: > https://www.teachmemicro.com/pocketbeagle-wifi/. > > I am sure that it is wired properly but it doesn't show up on Falcon as a > device when i do "ifconfig". > The USB however doesn't seem to be on because the LED on the dongle isn't > lighting up even though there is 5 volts to the USB. > > I have made sure that the USB pins are not being used by Falcon through > the web interface. > > The last thing i have tried was going through "connmanctl" but I get this > error when i try to enable WIFI. > "Error wifi: Method "SetProperty" with signature "sv" on interface > "net.connman.Technology" doesn't exist" > > Are there any suggestions as to what to try or where to debug this issue? > > Thanks for your help! > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/96dd2698-fb12-486b-9e52-76cb4abe76d6%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
