In principle yes, but given that you won't need that many bits and that the BBB pins

are relatively weak drivers and the ground connections on the BBB are a joke, I prefer

74LVC244 / 74LVC245 or similar. They present less load to the BBB and are also much

more common, mainstream devices, and cheap.

Cheers, Gerhard


p.s.

Has anybody tested out what it takes to isolate that 16 bit multiplexed bus?


Am 01.12.18 um 02:31 schrieb Mike Brandon:
Actually, one more question before I go cry myself to sleep...

Considering I will want to make similar connections on P8 in the future... can I use a device like this to isolate the boot pins at boot?

http://www.ti.com/lit/ds/symlink/sn74cbtd16211.pdf


--
For more options, visit http://beagleboard.org/discuss
--- You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/e2afe3de-8d3f-71bc-e1f2-c0e504a18e67%40hoffmann-hochfrequenz.de.
For more options, visit https://groups.google.com/d/optout.

Reply via email to