This still didnt flash my beaglebone, but I tried it and at least my beaglebone runs now (user leds flash again). So thank you for this comment. All the best
On Thursday, November 22, 2018 at 8:55:14 AM UTC-5, [email protected] wrote: > > > Hey guys, > Doubt this info will be useful to anyone 4/5 years past the date the asked > question was asked, but for anyone in a similar situation I had the same > problem as Anantha Krishnan. I am running on the BeagleBone Black rev C and > in all scenarios the images taken from > https://beagleboard.org/latest-images were completely ignored by the > BeagleBone. With the micro SD inserted whilst holding the boot button (S2) > and applying power (micro USB to USB), nothing happened. What did solve my > problem was changing the software that I used to write my image on my micro > SD card. Instead of using Win32DiskImager I changed to balenaEtcher. Whilst > the writing of the image took roughly 5 times as long, as soon as I > repeated the process it worked first time. Not sure whether I was in a > special scenario and this would work for others but its defiantly worth a > shot! > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9626559d-0e6b-41ac-a48c-d635d9551c32%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
