Beaglebone Friends and Family, Robert; We would like assistance in getting the BBONE-GATEWAY-CAPE running properly. As is known, there were some design trade-offs on this particular cape that resulted in it not being granted 100% BeagleBoard.org support, but it is understood that the beagle community may have it working with recent images.
Several previous threads talk to this topic such as this one here: Linux/BEAGLEBK: using beaglebone black with on board eMMC flash and element 14 wirelss cape TI E2E Community Still, the underlying question is : what exactly needs to be done to enable the wireless cape? The readme instructions are either not correct or not enough explanation for some users to make the changes needed to enable it. Following the steps in the Readme have not been able to enable it to get it up and running. First apparent problem is the root password. This is not accepted - says access denied. Users are still sometime able to get in by SSH/PuTTY and use the username Debian and password temppwd. Some have tried setting a root password with sudo but after a restart root still won't often work - therefore does the beagle community have the documentation reflecting the actual experience for this particular cape? Comments welcomed and apprecicase? Thanks so much! TY, Chris -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ce411073-ac7f-417c-a270-6d6081f99f5f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
