Yesterday, my BeagleBone Black (Rev C) was working fine. Today, when I
powered up the system eth0 is not coming up.
$ ip addr show eth0
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether c8:df:84:d7:07:a6 brd ff:ff:ff:ff:ff:ff
How do I get eth0 to come up again? I've tried rebooting the board with `$
sudo reboot` and restarting the service with `$ sudo /etc/init.d/networking
restart` but neither helped. Yesterday, I installed smbclient and
cifs-utils, and deleted the /usr/src and /usr/include directories. Does
anyone know how to get eth0 working?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/56989cad-b907-4b9c-be7a-2d736cbed6d4%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
