On 2/14/2019 1:40 AM, Tarmo Kuuse wrote:
Hi Jim,

On Wednesday, 13 February 2019 21:24:52 UTC+2, Jim Fell wrote:

    Yesterday, my BeagleBone Black (Rev C) was working fine.  Today,
    when I powered up the system eth0 is not coming up.

        $ ip addr show eth0
        2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
        group default qlen 1000
            link/ether c8:df:84:d7:07:a6 brd ff:ff:ff:ff:ff:ff


    How do I get eth0 to come up again?  I've tried rebooting the
    board with `$ sudo reboot` and restarting the service with `$ sudo
    /etc/init.d/networking restart` but neither helped.  Yesterday, I
    installed smbclient and cifs-utils, and deleted the /usr/src and
    /usr/include directories.  Does anyone know how to get eth0 working?


There is a known problem with the Ethernet MAC not coming up on boot. This is likely to happen when you're powering the BeagleBone through the barrel connector. If this is the case, a simple reboot won't help. You need to shut down, remove power for 10 seconds and reconnect power. IIRC the physical reset button also helps.


physical reset button is a soft reset. a power cycle is the only way.

--
Kind regards,
Tarmo
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected] <mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/16a25c7f-26aa-48fc-85c1-24270c0cd7b2%40googlegroups.com <https://groups.google.com/d/msgid/beagleboard/16a25c7f-26aa-48fc-85c1-24270c0cd7b2%40googlegroups.com?utm_medium=email&utm_source=footer>.
For more options, visit https://groups.google.com/d/optout.

--
For more options, visit http://beagleboard.org/discuss
--- You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/efc9301b-14bd-3837-360d-fb071e675d48%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to