I used to be able to power my servo and DC motors with the 2 cell lipo input. Now, I can't power the BB on at all through the lipo input and for rc_test_adc (using 9V plugged into the wall - this is the only way I can power on the board) I'm getting the following:
adc_0 | adc_1 | adc_2 | adc_3 |DC_Jack|Battery| 1.75 | 1.63 | 1.72 | 1.02 | 9.25 | 0.00 | On my other (fully working) beaglebone, the Battery level reads 2.1 running the same test with the same power source. Anyone have any idea what could be the issue? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/bf4b3f32-49f4-4648-9aeb-8893a5e3a398%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
