It all depends how handy you are and the quantity you need. A CAN tranceiver is a very simple device, it requires power (2 sides), has two pins for process conenction (CAN-High and CAN-Low) and two pins for µC connection (TX & RX)
If you need only one/some you can easily build this using prototyping boards and wires. If you need more you better design a PCB and assemble the components. Best is to start from the simple prototyping and evolve. The Beagle CAN processing is rather easy and works almost immediatly. Regards, Gwen Op vr 22 feb. 2019 om 13:38 schreef <[email protected]>: > > Hi. > > I have a project idea that involves using the BeagleBone Black CAN bus > controller. I found this cape on e-linux > https://elinux.org/Beagleboard:BeagleBone_CANBus but then I realized it > is discontinued long time ago, most distributors have it out of stock or > discontinued. Is there any alternatives to this cape? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/3e9b2ed2-c1ec-490f-83e8-d5ebe84f47a8%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/3e9b2ed2-c1ec-490f-83e8-d5ebe84f47a8%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAFfeaG_KHub1qPSczyg8jStsEkLfUgki-GJqJujUi9Qx45-NnQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
