Run it from the plug in card? Plug in the size you need. Expand the installed image to make the whole card available to you. --- Graham
== On Saturday, February 23, 2019 at 2:22:13 PM UTC-6, [email protected] wrote: > > Yes you were right. I now finally have a debian jessie system on my device > (crumbs that was difficult), but I would like a gui. I have tried to > install ldxe core, but it tells me I don't have room. Is there a > solution\/ I would like a a graphical interface. > Thanks for all your replies > > On Friday, 22 February 2019 14:54:37 UTC, RobertCNelson wrote: >> >> On Fri, Feb 22, 2019 at 3:32 AM <[email protected]> wrote: >> > >> > >> > >> > On Thursday, 21 February 2019 21:42:53 UTC, RobertCNelson wrote: >> >> >> >> On Thu, Feb 21, 2019 at 3:38 PM <[email protected]> wrote: >> >> > >> >> > I am finding it impossible to flash an old BBB with debian. I >> download images from the beagle website copy it to a disk with Etcher, edit >> the the uEnv.txt file with 'sudo nano '/media/aaron/rootfs/boot/uEnv.txt' >> press the little power button and plug in a power lead, but I get no >> flashing lights....nothing. >> >> > I have sucessfuly flashed and used Angstrom, but it seems a bit >> limited. >> >> > Also, I am trying to use syncloud but with absolutely no success. >> >> > Can somebody pleas tell me where I am going wrong >> >> >> >> Since you flashed an old version of Angstrom, you better follow the >> > >> > >> > >> > >> > I have tried that many many times and I get no lights flashing at all. >> If I power up without pressing the boot button I get 3 blue led's on >> constant... no flashing >> >> >> >> offical directions: >> >> >> >> 1: Using your thumb nail, push and hold the boot button down. >> >> 2: Plug in 5Volt DC jack >> >> 3: Wait till 4 led's turn on >> >> 4: Lift thumb nail.. >> >> Okay, if the above 4 step procedure doesn't work, sadly that leaves a >> couple options. >> >> You actually didn't follow that procedure >> The image is corrupt. >> >> So try it again after reflashing the microSD. >> >> If it still doesn't work, grab a serial cable: >> >> https://elinux.org/Beagleboard:BeagleBone_Black_Serial >> >> and get me the serial boot log for debugging.. >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d650656d-4c72-4434-ac43-5b36205687d8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
