Hello Everyone, I have a beaglebone green and I converted the am335x-evm.dtb file to a dts file. After that I made some changes in it to give the specification of the board connected to the BBG. Then I changed that dts file to dtb file so that it can be read by the kernel during the boot process. At the end, I added a line in the the /boot/uEnv.txt file as follows... dtb=am335x-evm.dtb
But now I am not able to boot into BBG. All the four leds are ON and doesn't blink anymore. I have two questions to ask.. What was my mistake here? And how can I recover my BBG? Thanks -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/cced1bf1-4524-4b84-98cd-46110d95d671%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
