On Thu, Mar 21, 2019 at 7:12 AM <[email protected]> wrote: > > Hello Everyone, > > I have a beaglebone green and I converted the am335x-evm.dtb file to a dts > file. > After that I made some changes in it to give the specification of the board > connected > to the BBG. Then I changed that dts file to dtb file so that it can be read > by the kernel > during the boot process. > At the end, I added a line in the the /boot/uEnv.txt file as follows... > dtb=am335x-evm.dtb > > But now I am not able to boot into BBG. All the four leds are ON and doesn't > blink > anymore. > > I have two questions to ask.. > What was my mistake here?
Your mistake was using using the dtb for the am335x-evm.dtb.. Here's what that board looks like: http://www.ti.com/tool/TMDXEVM3358 Doesn't look at all like the BBG > And how can I recover my BBG? Just reflash.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjM6Rj03C0FD-e3MB%2BUL%3D5o_jaCEAWOTqkn9rvH-gx1Jw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
