I also tried it on different machines with different USB cables. My BBBW is still not able to scan and list different networks.
On Mon, Mar 25, 2019 at 8:58 AM Lakshana R <[email protected]> wrote: > Hi, > > This is what I get on running those commands: > > *debian@beaglebone:~$ sudo cat /boot/uEnvt.txt* > *[sudo] password for debian:* > *cat: /boot/uEnvt.txt: No such file or directory* > *debian@beaglebone:~$ sudo dmesg* > *[ 0.000000] Booting Linux on physical CPU 0x0* > *[ 0.000000] Linux version 4.14.94-ti-r97 (root@w2-imx6q-wandboard-2gb) > (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PREEMPT Tue > Mar 12 21:45: 30 UTC 2019* > *[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), > cr=10c5387d* > *[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing > instruction cache* > *[ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black > Wireless* > *[ 0.000000] Memory policy: Data cache writeback* > *[ 0.000000] efi: Getting EFI parameters from FDT:* > *[ 0.000000] efi: UEFI not found.* > *[ 0.000000] cma: Reserved 48 MiB at 0x9c800000* > *[ 0.000000] On node 0 totalpages: 130560* > *[ 0.000000] free_area_init_node: node 0, pgdat c14dc8c0, node_mem_map > df961000* > *[ 0.000000] Normal zone: 1148 pages used for memmap* > *[ 0.000000] Normal zone: 0 pages reserved* > *[ 0.000000] Normal zone: 130560 pages, LIFO batch:31* > *[ 0.000000] CPU: All CPU(s) started in SVC mode.* > *[ 0.000000] AM335X ES2.1 (sgx neon)* > *[ 0.000000] random: get_random_bytes called from > start_kernel+0xac/0x458 with crng_init=0* > *[ 0.000000] percpu: Embedded 18 pages/cpu @df8e5000 s41548 r8192 > d23988 u73728* > *[ 0.000000] pcpu-alloc: s41548 r8192 d23988 u73728 alloc=18*4096* > *[ 0.000000] pcpu-alloc: [0] 0* > *[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: > 129412* > *[ 0.000000] Kernel command line: console=ttyO0,115200n8 > bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 > rootwait coherent_pool=1M net.ifnames=0 quiet* > *[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)* > *[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 > bytes)* > *[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 > bytes)* > *[ 0.000000] Memory: 441476K/522240K available (12288K kernel code, > 1080K rwdata, 4232K rodata, 1024K init, 360K bss, 31612K reserved, 49152K > cma-reserved, 0K highmem)* > *[ 0.000000] Virtual kernel memory layout:* > * vector : 0xffff0000 - 0xffff1000 ( 4 kB)* > * fixmap : 0xffc00000 - 0xfff00000 (3072 kB)* > * vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)* > * lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)* > * pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)* > * modules : 0xbf000000 - 0xbfe00000 ( 14 MB)* > * .text : 0xc0008000 - 0xc0d00000 (13280 kB)* > * .init : 0xc1300000 - 0xc1400000 (1024 kB)* > * .data : 0xc1400000 - 0xc150e3b0 (1081 kB)* > * .bss : 0xc15189e8 - 0xc1572d80 ( 361 kB)* > *[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1* > *[ 0.000000] ftrace: allocating 40808 entries in 120 pages* > *[ 0.000000] Preemptible hierarchical RCU implementation.* > *[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.* > *[ 0.000000] Tasks RCU enabled.* > *[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, > nr_cpu_ids=1* > *[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16* > *[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 > interrupts* > *[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz* > *[ 0.000025] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps > every 89478484971ns* > * 0.000048] clocksource: timer1: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 79635851949 ns* > *[ 0.000058] OMAP clocksource: timer1 at 24000000 Hz* > *[ 0.002173] timer_probe: no matching timers found* > *[ 0.002525] Console: colour dummy device 80x30* > *[ 0.002554] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'* > *[ 0.002559] This ensures that you still see kernel messages. Please* > *[ 0.002563] update your kernel commandline.* > *[ 0.002590] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)* > *[ 0.021017] pid_max: default: 32768 minimum: 301* > *[ 0.021286] Security Framework initialized* > *[ 0.021302] Yama: becoming mindful.* > *[ 0.021342] AppArmor: AppArmor disabled by boot time parameter* > *[ 0.021414] Mount-cache hash table entries: 1024 (order: 0, 4096 > bytes)* > *[ 0.021425] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 > bytes)* > *[ 0.022462] CPU: Testing write buffer coherency: ok* > *[ 0.022531] CPU0: Spectre v2: using BPIALL workaround* > *[ 0.022995] CPU0: thread -1, cpu 0, socket -1, mpidr 0* > *[ 0.037112] Setting up static identity map for 0x80100000 - 0x80100060* > *[ 0.045019] Hierarchical SRCU implementation.* > *[ 0.056133] EFI services will not be available.* > *[ 0.061025] smp: Bringing up secondary CPUs ...* > *[ 0.061039] smp: Brought up 1 node, 1 CPU* > *[ 0.061050] SMP: Total of 1 processors activated (995.32 BogoMIPS).* > *[ 0.061057] CPU: All CPU(s) started in SVC mode.* > *[ 0.062662] devtmpfs: initialized* > *[ 0.101340] VFP support v0.3: implementor 41 architecture 3 part 30 > variant crev 3* > *[ 0.101803] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 7645041785100000 ns* > *[ 0.101828] futex hash table entries: 256 (order: 2, 16384 bytes)* > *[ 0.105818] xor: measuring software checksum speed* > *[ 0.145002] arm4regs : 1217.000 MB/sec* > *[ 0.184992] 8regs : 1091.000 MB/sec* > *[ 0.224992] 32regs : 1088.000 MB/sec* > *[ 0.264991] neon : 1669.000 MB/sec* > *[ 0.264998] xor: using function: neon (1669.000 MB/sec)* > *[ 0.265015] pinctrl core: initialized pinctrl subsystem* > *[ 0.266272] NET: Registered protocol family 16* > *[ 0.270141] DMA: preallocated 1024 KiB pool for atomic coherent > allocations* > *[ 0.359531] omap_hwmod: debugss: _wait_target_disable failed* > *[ 0.400241] cpuidle: using governor menu* > *[ 0.406837] OMAP GPIO hardware version 0.1* > *[ 0.409729] GPIO line 106 (LS_BUF_EN) hogged as output/high* > *[ 0.432504] No ATAGs?* > *[ 0.432526] hw-breakpoint: debug architecture 0x4 unsupported.* > *[ 0.434178] omap4_sram_init:Unable to allocate sram needed to handle > errata I 688* > *[ 0.434196] omap4_sram_init:Unable to get sram pool needed to handle > errata I 688* > *[ 0.461149] raid6: using algorithm neonx8 gen() 0 MB/s* > *[ 0.461162] raid6: .... xor() 0 MB/s, rmw enabled* > *[ 0.461170] raid6: using neon recovery algorithm* > *[ 0.468937] edma 49000000.edma: TI EDMA DMA engine driver* > *[ 0.476354] SCSI subsystem initialized* > *[ 0.477186] libata version 3.00 loaded.* > *[ 0.477506] usbcore: registered new interface driver usbfs* > *[ 0.477563] usbcore: registered new interface driver hub* > *[ 0.477681] usbcore: registered new device driver usb* > *[ 0.478646] omap_i2c 44e0b000.i2c: could not find pctldev for node > /ocp/l4_wk > up@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe* > *[ 0.479627] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz* > *[ 0.480939] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz* > *[ 0.481462] media: Linux media interface: v0.10* > *[ 0.481530] Linux video capture interface: v2.00* > *[ 0.481690] pps_core: LinuxPPS API ver. 1 registered* > *[ 0.481698] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 > Rodolfo Giometti <[email protected] <[email protected]>>* > *[ 0.481727] PTP clock support registered* > *[ 0.482370] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400* > *[ 0.485305] FPGA manager framework* > *[ 0.485396] Advanced Linux Sound Architecture Driver Initialized.* > *[ 0.486040] NetLabel: Initializing* > *[ 0.486049] NetLabel: domain hash size = 128* > *[ 0.486053] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO* > *[ 0.486150] NetLabel: unlabeled traffic allowed by default* > *[ 0.489494] clocksource: Switched to clocksource timer1* > *[ 0.624594] VFS: Disk quotas dquot_6.6.0* > *[ 0.624717] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 > bytes)* > *[ 0.637431] NET: Registered protocol family 2* > *[ 0.638472] TCP established hash table entries: 4096 (order: 2, 16384 > bytes)* > *[ 0.638521] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)* > *[ 0.638578] TCP: Hash tables configured (established 4096 bind 4096)* > *[ 0.638706] UDP hash table entries: 256 (order: 1, 8192 bytes)* > *[ 0.638728] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)* > *[ 0.638944] NET: Registered protocol family 1* > *[ 0.647870] RPC: Registered named UNIX socket transport module.* > *[ 0.647879] RPC: Registered udp transport module.* > *[ 0.647885] RPC: Registered tcp transport module.* > *[ 0.647890] RPC: Registered tcp NFSv4.1 backchannel transport module.* > *[ 0.648691] Unpacking initramfs...* > *[ 0.894574] Freeing initrd memory: 4320K* > *[ 0.895231] hw perfevents: no interrupt-affinity property for /pmu, > guessing.* > *[ 0.895469] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 > counters available* > *[ 0.897788] audit: initializing netlink subsys (disabled)* > *[ 0.899044] audit: type=2000 audit(0.900:1): state=initialized > audit_enabled=0 res=1* > *[ 0.899196] workingset: timestamp_bits=14 max_order=17 bucket_order=3* > *[ 0.904870] zbud: loaded* > *[ 0.912593] NFS: Registering the id_resolver key type* > *[ 0.912638] Key type id_resolver registered* > *[ 0.912644] Key type id_legacy registered* > *[ 0.912663] nfs4filelayout_init: NFSv4 File Layout Driver > Registering...* > *[ 0.913025] fuse init (API version 7.26)* > *[ 0.923010] Key type asymmetric registered* > *[ 0.923025] Asymmetric key parser 'x509' registered* > *[ 0.923153] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 245)* > *[ 0.927498] io scheduler noop registered* > *[ 0.927509] io scheduler deadline registered* > *[ 0.927793] io scheduler cfq registered (default)* > *[ 0.927803] io scheduler mq-deadline registered* > *[ 0.930570] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 > size 568* > *[ 0.942361] gpio-of-helper ocp:cape-universal: ready* > *[ 0.953323] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc > handle* > *[ 0.955816] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled* > *[ 0.959651] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, > base_baud = 3000000) is a 8250* > *[ 0.971524] console [ttyS0] enabled* > *[ 0.972665] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 31, > base_baud = 3000000) is a 8250* > *[ 0.973818] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 32, > base_baud = 3000000) is a 8250* > *[ 0.974929] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 33, > base_baud = 3000000) is a 8250* > *[ 0.975913] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 34, > base_baud = 3000000) is a 8250* > *[ 0.976851] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 35, > base_baud = 3000000) is a 8250* > *[ 0.980359] omap_rng 48310000.rng: Random Number Generator ver. 20* > *[ 0.981756] [drm] Initialized vgem 1.0.0 20120112 for virtual device > on minor 0* > *[ 0.981867] usbcore: registered new interface driver udl* > *[ 0.989891] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write* > *[ 0.990220] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write* > *[ 0.990444] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write* > *[ 0.990689] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write* > *[ 0.991249] eqep 48300180.eqep: ver. 1.0* > *[ 0.991435] eqep 48300180.eqep: count_mode:0* > *[ 0.991446] eqep 48300180.eqep: invert_qa:1* > *[ 0.991454] eqep 48300180.eqep: invert_qb:1* > *[ 0.991462] eqep 48300180.eqep: invert_qi:0* > *[ 0.991471] eqep 48300180.eqep: invert_qs:0* > *[ 0.991479] eqep 48300180.eqep: swap_inputs:0* > *[ 0.991487] eqep 48300180.eqep: QDECCTL:0x0180* > *[ 0.991496] eqep 48300180.eqep: QPOSINIT:0x00000000* > *[ 0.991503] eqep 48300180.eqep: QPOSMAX:0xffffffff* > *[ 0.991510] eqep 48300180.eqep: QPOSCNT:0x00000000* > *[ 0.991519] eqep 48300180.eqep: omit_interrupt:0* > *[ 0.991526] eqep 48300180.eqep: QEINT:0x0800* > *[ 0.991534] eqep 48300180.eqep: QUPRD:0x05f5e100* > *[ 0.991541] eqep 48300180.eqep: QEPCTL:0x009e write* > *[ 0.991548] eqep 48300180.eqep: QEPCTL:0x009e read* > *[ 0.991573] eqep 48300180.eqep: irq:133, clk_rate:100000000* > *[ 0.991817] eqep 48302180.eqep: ver. 1.0* > *[ 0.991938] eqep 48302180.eqep: count_mode:0* > *[ 0.991948] eqep 48302180.eqep: invert_qa:1* > *[ 0.991956] eqep 48302180.eqep: invert_qb:1* > *[ 0.991964] eqep 48302180.eqep: invert_qi:0* > *[ 0.991972] eqep 48302180.eqep: invert_qs:0* > *[ 0.991980] eqep 48302180.eqep: swap_inputs:0* > *[ 0.991988] eqep 48302180.eqep: QDECCTL:0x0180* > *[ 0.991995] eqep 48302180.eqep: QPOSINIT:0x00000000* > *[ 0.992002] eqep 48302180.eqep: QPOSMAX:0xffffffff* > *[ 0.992009] eqep 48302180.eqep: QPOSCNT:0x00000000* > *[ 0.992017] eqep 48302180.eqep: omit_interrupt:0* > *[ 0.992024] eqep 48302180.eqep: QEINT:0x0800* > *[ 0.992031] eqep 48302180.eqep: QUPRD:0x05f5e100* > *[ 0.992038] eqep 48302180.eqep: QEPCTL:0x009e write* > *[ 0.992046] eqep 48302180.eqep: QEPCTL:0x009e read* > *[ 0.992066] eqep 48302180.eqep: irq:135, clk_rate:100000000* > *[ 0.992251] eqep 48304180.eqep: ver. 1.0* > *[ 0.992350] eqep 48304180.eqep: count_mode:0* > *[ 0.992359] eqep 48304180.eqep: invert_qa:1* > *[ 0.992367] eqep 48304180.eqep: invert_qb:1* > *[ 0.992375] eqep 48304180.eqep: invert_qi:0* > *[ 0.992383] eqep 48304180.eqep: invert_qs:0* > *[ 0.992390] eqep 48304180.eqep: swap_inputs:0* > *[ 0.992398] eqep 48304180.eqep: QDECCTL:0x0180* > *[ 0.992406] eqep 48304180.eqep: QPOSINIT:0x00000000* > *[ 0.992413] eqep 48304180.eqep: QPOSMAX:0xffffffff* > *[ 0.992420] eqep 48304180.eqep: QPOSCNT:0x00000000* > *[ 0.992427] eqep 48304180.eqep: omit_interrupt:0* > *[ 0.992434] eqep 48304180.eqep: QEINT:0x0800* > *[ 0.992441] eqep 48304180.eqep: QUPRD:0x05f5e100* > *[ 0.992448] eqep 48304180.eqep: QEPCTL:0x009e write* > *[ 0.992455] eqep 48304180.eqep: QEPCTL:0x009e read* > *[ 0.992474] eqep 48304180.eqep: irq:137, clk_rate:100000000* > *[ 1.017582] random: fast init done* > *[ 1.022848] libphy: Fixed MDIO Bus: probed* > *[ 1.023713] CAN device driver interface* > *[ 1.025043] c_can_platform 481cc000.can: c_can_platform device > registered (regs=fa1cc000, irq=43)* > *[ 1.026210] c_can_platform 481d0000.can: c_can_platform device > registered (regs=fa1d0000, irq=44)* > *[ 1.029564] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver* > *[ 1.029625] ehci-platform: EHCI generic platform driver* > *[ 1.030019] ehci-omap: OMAP-EHCI Host Controller driver* > *[ 1.030934] usbcore: registered new interface driver usb-storage* > *[ 1.034291] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy > supply vcc not found, using dummy regulator* > *[ 1.037841] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy > supply vcc not found, using dummy regulator* > *[ 1.042237] musb-hdrc musb-hdrc.1: MUSB HDRC host driver* > *[ 1.042292] musb-hdrc musb-hdrc.1: new USB bus registered, assigned > bus number 1* > *[ 1.042625] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002* > *[ 1.042636] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1* > *[ 1.042645] usb usb1: Product: MUSB HDRC host driver* > *[ 1.042652] usb usb1: Manufacturer: Linux 4.14.94-ti-r97 musb-hcd* > *[ 1.042659] usb usb1: SerialNumber: musb-hdrc.1* > *[ 1.043559] hub 1-0:1.0: USB hub found* > *[ 1.043635] hub 1-0:1.0: 1 port detected* > *[ 1.056256] omap_rtc 44e3e000.rtc: registered as rtc0* > *[ 1.057867] i2c /dev entries driver* > *[ 1.059064] Driver for 1-wire Dallas network protocol.* > *[ 1.062316] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 > sec* > *[ 1.062918] softdog: initialized. soft_noboot=0 soft_margin=60 sec > soft_panic=0 (nowayout=0)* > *[ 1.064454] cpuidle: enable-method property 'ti,am3352' found > operations* > *[ 1.065290] sdhci: Secure Digital Host Controller Interface driver* > *[ 1.065297] sdhci: Copyright(c) Pierre Ossman* > *[ 1.066270] omap_hsmmc 48060000.mmc: Got CD GPIO* > *[ 1.201461] mmc1: new high speed MMC card at address 0001* > *[ 1.202576] mmcblk1: mmc1:0001 S10004 3.56 GiB* > *[ 1.203059] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB* > *[ 1.203459] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB* > *[ 1.203829] mmcblk1rpmb: mmc1:0001 S10004 partition 3 4.00 MiB* > *[ 1.205144] mmcblk1: p1* > *[ 1.266175] sdhci-pltfm: SDHCI platform and OF driver helper* > *[ 1.268542] ledtrig-cpu: registered to indicate activity on CPUs* > *[ 1.269196] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2* > *[ 1.269649] omap-aes 53500000.aes: will run requests pump with > realtime priority* > *[ 1.273957] omap_hsmmc 47810000.mmc: card claims to support voltages > below defined range* > *[ 1.275608] omap-sham 53100000.sham: hw accel on OMAP rev 4.3* > *[ 1.279645] hidraw: raw HID events driver (C) Jiri Kosina* > *[ 1.280556] usbcore: registered new interface driver usbhid* > *[ 1.280564] usbhid: USB HID core driver* > *[ 1.281020] remoteproc remoteproc0: wkup_m3 is available* > *[ 1.291409] mmc2: new high speed SDIO card at address 0001* > *[ 1.297772] wireguard: WireGuard 0.0.20190227 loaded. See > www.wireguard.com <http://www.wireguard.com> for information.* > *[ 1.297784] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld > <[email protected] <[email protected]>>. All Rights Reserved.* > *[ 1.298732] NET: Registered protocol family 10* > *[ 1.304223] Segment Routing with IPv6* > *[ 1.304307] mip6: Mobile IPv6* > *[ 1.304326] NET: Registered protocol family 17* > *[ 1.304344] can: controller area network core (rev 20170425 abi 9)* > *[ 1.304438] NET: Registered protocol family 29* > *[ 1.304566] Key type dns_resolver registered* > *[ 1.304572] mpls_gso: MPLS GSO support* > *[ 1.304860] omap_voltage_late_init: Voltage driver support not added* > *[ 1.311980] PM: Cannot get wkup_m3_ipc handle* > *[ 1.316645] ThumbEE CPU extension supported.* > *[ 1.316675] Registering SWP/SWPB emulation handler* > *[ 1.317759] registered taskstats version 1* > *[ 1.317890] zswap: loaded using pool lzo/zbud* > *[ 1.320338] Btrfs loaded, crc32c=crc32c-generic* > *[ 1.320451] ima: No TPM chip found, activating TPM-bypass! (rc=-19)* > *[ 1.320475] ima: Allocated hash algorithm: sha256* > *[ 1.476393] tda998x 0-0070: found TDA19988* > *[ 1.478049] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)* > *[ 1.478073] [drm] Supports vblank timestamp caching Rev 2 > (21.10.2013).* > *[ 1.478079] [drm] No driver support for vblank timestamp query.* > *[ 1.478608] [drm] Cannot find any crtc or sizes* > *[ 1.479339] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc > on minor 1* > *[ 1.494075] input: tps65217_pwr_but as > /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0* > *[ 1.494683] tps65217 0-0024: TPS65217 ID 0xe version 1.2* > *[ 1.495184] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write* > *[ 1.495300] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz* > *[ 1.497044] remoteproc remoteproc0: powering up wkup_m3* > *[ 1.497159] remoteproc remoteproc0: Booting fw image > am335x-pm-firmware.elf, size 217168* > *[ 1.501375] remoteproc remoteproc0: remote processor wkup_m3 is now up* > *[ 1.501394] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = > 0x193* > *[ 1.504408] hdmi-audio-codec hdmi-audio-codec.0.auto: ASoC: no source > widget found for Playback* > *[ 1.513374] hdmi-audio-codec hdmi-audio-codec.0.auto: ASoC: Failed to > add route Playback -> direct -> TX* > *[ 1.523787] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp > mapping ok* > *[ 1.530337] PM: bootloader does not support rtc-only!* > *[ 1.531596] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 > 00:00:01 UTC (946684801)* > *[ 1.531614] of_cfs_init* > *[ 1.531775] of_cfs_init: OK* > *[ 1.533170] wlan-en-regulator: disabling* > *[ 1.533192] ALSA device list:* > *[ 1.533201] #0: TI BeagleBone Black* > *[ 1.540057] Freeing unused kernel memory: 1024K* > *[ 1.996361] random: systemd-udevd: uninitialized urandom read (16 > bytes read)* > *[ 1.997109] random: systemd-udevd: uninitialized urandom read (16 > bytes read)* > *[ 1.997223] random: systemd-udevd: uninitialized urandom read (16 > bytes read)* > *[ 2.494259] [drm] Cannot find any crtc or sizes* > *[ 7.437223] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data > mode. Opts: (null)* > *[ 7.874465] systemd[1]: System time before build time, advancing > clock.* > *[ 7.951984] ip_tables: (C) 2000-2006 Netfilter Core Team* > *[ 7.985058] systemd[1]: systemd 232 running in system mode. (+PAM > +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP > +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS > +KMOD +IDN)* > *[ 7.986049] systemd[1]: Detected architecture arm.* > *[ 7.987368] systemd[1]: Set hostname to <beaglebone>.* > *[ 8.569873] systemd[1]: Created slice User and Session Slice.* > *[ 8.570793] systemd[1]: Listening on /dev/initctl Compatibility Named > Pipe.* > *[ 8.571002] systemd[1]: Reached target Remote File Systems.* > *[ 8.571434] systemd[1]: Listening on Syslog Socket.* > *[ 8.571944] systemd[1]: Started Forward Password Requests to Wall > Directory Watch.* > *[ 8.573189] systemd[1]: Created slice System Slice.* > *[ 8.574852] systemd[1]: Created slice system-getty.slice.* > *[ 8.972940] pruss 4a300000.pruss: creating PRU cores and other child > platform devices* > *[ 9.007587] remoteproc remoteproc1: 4a334000.pru is available* > *[ 9.007714] pru-rproc 4a334000.pru: PRU rproc node > /ocp/pruss_soc_bus@4a326004/pruss@0/pru@34000 probed successfully* > *[ 9.015212] remoteproc remoteproc2: 4a338000.pru is available* > *[ 9.015328] pru-rproc 4a338000.pru: PRU rproc node > /ocp/pruss_soc_bus@4a326004/pruss@0/pru@38000 probed successfully* > *[ 9.625699] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro* > *[ 10.360408] systemd-journald[469]: Received request to flush runtime > journal from PID 1* > *[ 17.273302] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)* > *[ 17.576744] random: crng init done* > *[ 17.576769] random: 7 urandom warning(s) missed due to ratelimiting* > *[ 20.135998] using random self ethernet address* > *[ 20.136017] using random host ethernet address* > *[ 20.296662] using random self ethernet address* > *[ 20.296682] using random host ethernet address* > *[ 20.621157] Mass Storage Function, version: 2009/09/11* > *[ 20.621183] LUN: removable file: (no medium)* > *[ 20.890961] usb0: HOST MAC 50:65:83:d3:c2:37* > *[ 20.892643] usb0: MAC 50:65:83:d3:c2:38* > *[ 20.907722] usb1: HOST MAC 50:65:83:d3:c2:3a* > *[ 20.907999] usb1: MAC 50:65:83:d3:c2:3b* > *[ 21.190842] configfs-gadget gadget: high-speed config #1: c* > *[ 21.558609] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready* > *[ 21.766103] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready* > *[ 21.925402] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready* > *[ 42.238965] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)* > *[ 42.274299] wlcore: loaded* > *[ 45.676921] wlcore: ERROR timeout waiting for the hardware to complete > initialization* > *[ 48.148506] wlcore: ERROR timeout waiting for the hardware to complete > initialization* > *[ 50.588446] wlcore: ERROR timeout waiting for the hardware to complete > initialization* > *[ 50.599673] wlcore: ERROR firmware boot failed despite 3 retries* > *[ 53.319733] wlcore: ERROR timeout waiting for the hardware to complete > initialization* > *[ 56.329557] wlcore: ERROR timeout waiting for the hardware to complete > initialization* > *[ 58.714593] wlcore: ERROR timeout waiting for the hardware to complete > initialization* > *[ 58.723622] wlcore: ERROR firmware boot failed despite 3 retries* > *debian@beaglebone:~$* > > Thank you. > > On Fri, Mar 22, 2019 at 5:37 PM <[email protected]> wrote: > >> I don't understand why you haven't result of *dmesg |grep -i BBW* >> command's! >> Normaly you must have this result: bone_capemgr bone_capemgr: Baseboard: >> 'A335BNLT,BWA5,1646*BBW*GXXXX' >> And I don't understand too why ou haven't a bluetooth when you type *sudo >> connmanctl technologies*.. >> >> can you type this command: >> $sudo cat /boot/uEnvt.txt >> $sudo dmesg >> >> Can you try to connect your BBW on other computer and with other usb >> cable? >> >> Le vendredi 22 mars 2019 07:35:07 UTC+1, Lakshana R a écrit : >>> >>> Hi, >>> >>> On running the commands: >>> debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh >>> debian@beaglebone:~$ sudo connmanctl technologies >>> debian@beaglebone:~$ sudo wpa_supplicant -u >>> debian@beaglebone:~$ sudo rfkill list >>> debian@beaglebone:~$ sudo service wpa_supplicant status >>> debian@beaglebone:~$ sudo dmesg |grep -i BBW >>> >>> this is what I get, >>> >>> *debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh* >>> *git:/opt/scripts/:[24f2e3495113a63c2dcc2c0bdc0d7660b54e4e8f]* >>> *eeprom:[A335BNLTBWA51645BBWG0489]* >>> *model:[TI_AM335x_BeagleBone_Black_Wireless]* >>> *dogtag:[BeagleBoard.org Debian Image 2019-03-17]* >>> *bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot >>> 2018.09-00002-g08ae12f051]:[location: dd MBR]* >>> *kernel:[4.14.94-ti-r97]* >>> *nodejs:[v6.17.0]* >>> *uboot_overlay_options:[enable_uboot_overlays=1]* >>> >>> *uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo]* >>> *uboot_overlay_options:[enable_uboot_cape_universal=1]* >>> *pkg check: to individually upgrade run: [sudo apt install >>> --only-upgrade <pkg>]* >>> *pkg:[bb-cape-overlays]:[4.4.20190227.0-0rcnee0~stretch+20190227]* >>> *pkg:[bb-wl18xx-firmware]:[1.20190227.1-0rcnee0~stretch+20190227]* >>> *pkg:[kmod]:[23-2rcnee1~stretch+20171005]* >>> *pkg:[librobotcontrol]:[1.0.4-git20190107.0-0rcnee0~stretch+20190108]* >>> *pkg:[firmware-ti-connectivity]:[20180825+dfsg-1rcnee1~stretch+20181217]* >>> *groups:[debian : debian adm kmem dialout cdrom floppy audio dip video >>> plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep >>> admin spi tisdk weston-launch xenomai]* >>> *cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 >>> root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M >>> net.ifnames=0 quiet]* >>> *dmesg | grep remote* >>> *[ 1.281117] remoteproc remoteproc0: wkup_m3 is available* >>> *[ 1.496948] remoteproc remoteproc0: powering up wkup_m3* >>> *[ 1.497060] remoteproc remoteproc0: Booting fw image >>> am335x-pm-firmware.elf, size 217168* >>> *[ 1.501265] remoteproc remoteproc0: remote processor wkup_m3 is now >>> up* >>> *[ 8.951702] remoteproc remoteproc1: 4a334000.pru is available* >>> *[ 8.964959] remoteproc remoteproc2: 4a338000.pru is available* >>> *dmesg | grep pru* >>> *[ 8.916305] pruss 4a300000.pruss: creating PRU cores and other child >>> platform devices* >>> *[ 8.951702] remoteproc remoteproc1: 4a334000.pru is available* >>> *[ 8.951833] pru-rproc 4a334000.pru: PRU rproc node >>> /ocp/pruss_soc_bus@4a326004/pruss@0/pru@34000 probed successfully* >>> *[ 8.964959] remoteproc remoteproc2: 4a338000.pru is available* >>> *[ 8.965084] pru-rproc 4a338000.pru: PRU rproc node >>> /ocp/pruss_soc_bus@4a326004/pruss@0/pru@38000 probed successfully* >>> *dmesg | grep pinctrl-single* >>> *[ 0.930795] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 >>> size 568* >>> *dmesg | grep gpio-of-helper* >>> *[ 0.942522] gpio-of-helper ocp:cape-universal: ready* >>> *END* >>> *debian@beaglebone:~$ sudo connmanctl technologies* >>> */net/connman/technology/wifi* >>> * Name = WiFi* >>> * Type = wifi* >>> * Powered = True* >>> * Connected = False* >>> * Tethering = False* >>> *debian@beaglebone:~$ sudo wpa_supplicant -u* >>> *dbus: Could not request service name: already registered* >>> *Failed to initialize wpa_supplicant* >>> *debian@beaglebone:~$ sudo rfkill list* >>> *0: phy0: Wireless LAN* >>> * Soft blocked: no* >>> * Hard blocked: no* >>> *debian@beaglebone:~$ sudo service wpa_supplicant status* >>> *[sudo] password for debian:* >>> *● wpa_supplicant.service - WPA supplicant* >>> * Loaded: loaded (/lib/systemd/system/wpa_supplicant.service; >>> disabled; vendor* >>> * Active: active (running) since Sun 2019-03-17 13:20:50 UTC; 23min >>> ago* >>> * Main PID: 722 (wpa_supplicant)* >>> * Tasks: 1 (limit: 4915)* >>> * CGroup: /system.slice/wpa_supplicant.service* >>> * └─722 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant* >>> >>> *Mar 17 13:20:50 beaglebone systemd[1]: Starting WPA supplicant...* >>> *Mar 17 13:20:50 beaglebone systemd[1]: Started WPA supplicant.* >>> *Mar 17 13:20:50 beaglebone wpa_supplicant[722]: Successfully >>> initialized wpa_sup* >>> >>> *debian@beaglebone:~$ sudo dmesg | grep -i BBW* >>> *debian@beaglebone:~$* >>> >>> Thanks. >>> >>> On Thu, Mar 21, 2019 at 7:34 PM <[email protected]> wrote: >>> >>>> Hi, >>>> >>>> I think you have a fairly common error: >>>> https://wiki.archlinux.org/index.php/ConnMan#Troubleshooting >>>> >>>> Can you send the results (in text) for this commands please? >>>> debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh >>>> debian@beaglebone:~$ sudo connmanctl technologies >>>> debian@beaglebone:~$ sudo wpa_supplicant -u >>>> debian@beaglebone:~$ sudo rfkill list >>>> debian@beaglebone:~$ sudo service wpa_supplicant status >>>> debian@beaglebone:~$ sudo dmesg |grep -i BBW >>>> >>>> >>>> >>>> Le jeudi 21 mars 2019 11:27:52 UTC+1, Lakshana R a écrit : >>>>> >>>>> Hi Robert, >>>>> >>>>> I haven't got any response to my previous mail. So could you please >>>>> let me know what has to be done? >>>>> Awaiting your reply. >>>>> >>>>> Thanks. >>>>> >>>>> On Wed, Mar 20, 2019 at 11:44 AM Lakshana R <[email protected]> >>>>> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> I tried the new image, you gave me. I got the following output on >>>>>> running the connman commands. >>>>>> >>>>>> *Debian GNU/Linux 9 beaglebone ttyGS0* >>>>>> >>>>>> *BeagleBoard.org Debian Image 2019-03-17* >>>>>> >>>>>> *Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian >>>>>> <http://elinux.org/Beagleboard:BeagleBoneBlack_Debian>* >>>>>> >>>>>> *default username:password is [debian:temppwd]* >>>>>> >>>>>> *beaglebone login: debian* >>>>>> *Password:* >>>>>> *Last login: Sun Mar 17 13:21:31 UTC 2019 on ttyGS0* >>>>>> >>>>>> *The programs included with the Debian GNU/Linux system are free >>>>>> software;* >>>>>> *the exact distribution terms for each program are described in the* >>>>>> *individual files in /usr/share/doc/*/copyright.* >>>>>> >>>>>> *Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent* >>>>>> *permitted by applicable law.* >>>>>> *debian@beaglebone:~$ sudo connmanctl* >>>>>> *[sudo] password for debian:* >>>>>> *Error getting VPN connections: The name net.connman.vpn was not >>>>>> provided by any .service filescoconnmanctl> tether wifi off* >>>>>> *Error disabling wifi tethering: Already disabled* >>>>>> *connmanctl> enable wifi* >>>>>> *Error wifi: Already enabled* >>>>>> *connmanctl> scan wifi* >>>>>> *Error /net/connman/technology/wifi: No carrier* >>>>>> *connmanctl>* >>>>>> >>>>>> Please help me with it. >>>>>> >>>>>> On Wed, Mar 20, 2019 at 2:24 AM Robert Nelson <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> On Tue, Mar 19, 2019 at 7:49 AM Lakshana R <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> Hey, >>>>>>>> Thanks for reaching out. >>>>>>>> I get the following information while entering the command you gave >>>>>>>> me. >>>>>>>> Is there any problem with the hardware? >>>>>>>> [image: Screenshot (67).png] >>>>>>>> >>>>>>>> >>>>>>> Your board is acting strange, can you please test this test image: >>>>>>> >>>>>>> >>>>>>> https://rcn-ee.net/rootfs/bb.org/testing/2019-03-17/stretch-iot/bone-debian-9.8-iot-armhf-2019-03-17-4gb.img.xz >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> -- >>>>>>> Robert Nelson >>>>>>> https://rcn-ee.com/ >>>>>>> >>>>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "BeagleBoard" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/beagleboard/KiASpaKctaM/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/beagleboard/c6294775-d37b-4575-8aae-a5f897a89994%40googlegroups.com >>>> <https://groups.google.com/d/msgid/beagleboard/c6294775-d37b-4575-8aae-a5f897a89994%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/KiASpaKctaM/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/9a480cc7-7148-462d-bf4d-a5158cd7d34e%40googlegroups.com >> <https://groups.google.com/d/msgid/beagleboard/9a480cc7-7148-462d-bf4d-a5158cd7d34e%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAO7uA9r_dEyE6uT46KyWj%2B2eVmjLk%2BBqKLmHu1YytCbLpuepSw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
