Ok. We need to buy a new board. I appreciate your guidance. Thanks. On Mon, Mar 25, 2019 at 7:40 PM Robert Nelson <[email protected]> wrote:
> > debian@beaglebone:/opt/scripts/tools$ sudo /opt/scripts/tools/version.sh > > git:/opt/scripts/:[24f2e3495113a63c2dcc2c0bdc0d7660b54e4e8f] > > eeprom:[A335BNLTBWA51645BBWG0489] > > model:[TI_AM335x_BeagleBone_Black_Wireless] > > dogtag:[BeagleBoard.org Debian Image 2019-03-17] > > bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot > 2018.09-00002-g08ae12f051]:[location: dd MBR] > > kernel:[4.14.94-ti-r97] > > nodejs:[v6.17.0] > > uboot_overlay_options:[enable_uboot_overlays=1] > > > uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo] > > uboot_overlay_options:[enable_uboot_cape_universal=1] > > pkg check: to individually upgrade run: [sudo apt install --only-upgrade > <pkg>] > > pkg:[bb-cape-overlays]:[4.4.20190227.0-0rcnee0~stretch+20190227] > > pkg:[bb-wl18xx-firmware]:[1.20190227.1-0rcnee0~stretch+20190227] > > pkg:[kmod]:[23-2rcnee1~stretch+20171005] > > pkg:[librobotcontrol]:[1.0.4-git20190107.0-0rcnee0~stretch+20190108] > > pkg:[firmware-ti-connectivity]:[20180825+dfsg-1rcnee1~stretch+20181217] > > groups:[debian : debian adm kmem dialout cdrom floppy audio dip video > plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep > admin spi tisdk weston-launch xenomai] > > cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 > root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M > net.ifnames=0 quiet] > > dmesg | grep remote > > [ 1.281117] remoteproc remoteproc0: wkup_m3 is available > > [ 1.496948] remoteproc remoteproc0: powering up wkup_m3 > > [ 1.497060] remoteproc remoteproc0: Booting fw image > am335x-pm-firmware.elf, size 217168 > > [ 1.501265] remoteproc remoteproc0: remote processor wkup_m3 is now up > > [ 8.951702] remoteproc remoteproc1: 4a334000.pru is available > > [ 8.964959] remoteproc remoteproc2: 4a338000.pru is available > > dmesg | grep pru > > [ 8.916305] pruss 4a300000.pruss: creating PRU cores and other child > platform devices > > [ 8.951702] remoteproc remoteproc1: 4a334000.pru is available > > [ 8.951833] pru-rproc 4a334000.pru: PRU rproc node > /ocp/pruss_soc_bus@4a326004/pruss@0/pru@34000 probed successfully > > [ 8.964959] remoteproc remoteproc2: 4a338000.pru is available > > [ 8.965084] pru-rproc 4a338000.pru: PRU rproc node > /ocp/pruss_soc_bus@4a326004/pruss@0/pru@38000 probed successfully > > dmesg | grep pinctrl-single > > [ 0.930795] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 > size 568 > > dmesg | grep gpio-of-helper > > [ 0.942522] gpio-of-helper ocp:cape-universal: ready > > END > > > debian@beaglebone:~$ journalctl | grep wlcore > > Mar 17 13:21:14 beaglebone kernel: wlcore: wl18xx HW: 183x or 180x, PG > 2.2 (ROM 0x11) > > Mar 17 13:21:14 beaglebone kernel: wlcore: loaded > > Mar 17 13:21:18 beaglebone kernel: wlcore: ERROR timeout waiting for the > hardware to complete initialization > > Mar 17 13:21:20 beaglebone kernel: wlcore: ERROR timeout waiting for the > hardware to complete initialization > > Mar 17 13:21:23 beaglebone kernel: wlcore: ERROR timeout waiting for the > hardware to complete initialization > > Mar 17 13:21:23 beaglebone kernel: wlcore: ERROR firmware boot failed > despite 3 retries > > Mar 17 13:21:26 beaglebone kernel: wlcore: ERROR timeout waiting for the > hardware to complete initialization > > Mar 17 13:21:28 beaglebone kernel: wlcore: ERROR timeout waiting for the > hardware to complete initialization > > Mar 17 13:21:30 beaglebone kernel: wlcore: ERROR timeout waiting for the > hardware to complete initialization > > Mar 17 13:21:30 beaglebone kernel: wlcore: ERROR firmware boot failed > despite 3 retries > > I'd RMA the board, the wl1835 isn't responding to the default > firmware/images... > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAO7uA9pf9CiX2rWf1pABDELvr%3DWtE_2C61KtKMBs_dTN4hvuZQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
