Hi All Posted this on Adafruit Forum, but have been trying to post on this Google group for some time on other issues, but I never seeem to see my post anywhere. Hope this is better this time.
Have just received the second BBB's Rev.C from Adafruit and as I did on the first, I erased the MMCBLK1 so that it would not boot on it and not interfere with the libpruio. Used a good uSD and did: sudo dd if=/dev/zero bs=512 count=1024 of=/dev/mmcblk1 Once that was completed, sudo reboot. However, the only light that was On and stayed on was the 5vdc power adapter. Usually after a few sec's delay all 4 led's come on and the sequence starts. Nothing, no amount of button pressing will bring it back to life. Have of course confirmed the uSD on the other unit and all is ok. The unit has not even had any connections other then the power. Is this a warranty issue, how do I even go about that ? Regards Dinosaur Does anyone have any suggestions (other then the garbage bin) as to how this "New" unit can be recovered. <https://forums.adafruit.com/memberlist.php?mode=viewprofile&u=417212> Dinosaur1946 <https://forums.adafruit.com/memberlist.php?mode=viewprofile&u=417212> *Posts:* 1*Joined:* Thu Mar 28, 2019 9:32 am Top <https://forums.adafruit.com/viewtopic.php?f=49&t=149641&sid=fce3a50c451fc490ba6d17781329d35b#wrap> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e9fc338a-bbe2-4aeb-b20f-492508ebfe02%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
